ICE-‐ENTRY-‐100
10 PRINT-OUT OF THE PARAMETERS
The user can check the settings of ALL parameters on the ICE-ENTRY-100.
10.1
By sending this command to ICE-ENTRY-100 you receive SMS messages with all
parameters that are currently programmed in the unit:
;PALL;
10.2
By sending this command to ICE-ENTRY-100 you receive SMS messages with
current SW version running on ICE-ENTRY-100 device:
;PSW;
10.3
By sending this command to ICE-ENTRY-100 you receive SMS messages with signal
quality ICE-ENTRY-100 device is connected to network:
;PSQ;
10.4
By sending this command to ICE-ENTRY-100 you receive SMS message with all
currently programmed telephone numbers (TN1 – TN5):
;PTN;
10.5
By sending this command to ICE-ENTRY-100 you receive SMS message with all
currently programmed links (LN1 –LN6):
;PLN;
RECEIVE ALL PARAMETERS (PALL)
CHECK SW REVISION (PSW)
CHECK SIGNAL QUALITY (PSQ)
RECEIVE TELEPHONE NUMBERS (PTN)
RECEIVE LINKS (PLN)
Page
3 9
INSTALLATION
M
ANUAL