Table of Contents
Advertisement
EIS-1, EIS-2, EIS-4
USER MANUAL
8.5 KEYPAD PIN ENTRY – ACCESS
Secondary use of on-board keypad is access by entering PIN codes. Pin codes must be at least 4
digits.
Pin codes can be defined in two sections. First section is permanent pin code and second is
temporary pin codes which are limited by the consecutive time they are entered.
Permanent pin codes are placed in Pin access tab.
They are placed in two tables. For each table user can define which output they will trigger.
Figure 7: WEB Server-Keypad PIN Access: Permanent PIN codes
PIN entry: For each PIN entry user need to select PIN code value and optional User name.
Temporary pin codes are placed in Temporary pin access tab.
Page 17
Hide quick links:
Advertisement
Table of Contents
