ICE-‐ENTRY-‐100
9.1.1.2
ID parameter
ID parameter determines time period of the pulse length to trigger the alarm. The
pulse time can be from 0,5 seconds to 9999 seconds. The default time is 0,5
seconds when the parameter value is 0.
9.1.1.3
DD parameter
This parameter is used to define the delay between the time that alarm input is
trigged and the time that alarm is reported.
9.1.1.4
Table of parameters
Name
IN1
IN2
ID1
ID2
DD1
DD2
Example:
♦ Direct programming on the SIM card
Name
IN1
IN2
ID1
ID2
DD1
DD2
Mode of operation for input 1
Mode of operation for input 2
Input time integration delay on input 1
Input time integration delay on input 2
Time delay for alarm reporting on input 1
Time delay for alarm reporting on input 2
Table 1: IN, ID and DD parameters
ICE-ENTRY-100 PROGRAMMING TABLE
SIM CARD PHONE BOOK
Number
0
Alarm activated by connecting to GND
Alarm activated by connecting to GND + RST
SMS
4
Input 1 has to be valid for 10 second to trigger
10
the alarm
Input 2 has to be valid for 0,5 second to trigger
0
the alarm
Reporting of the alarm on input 1 is delayed by
0
0s
Reporting of the alarm on input 1 is delayed by
15
15s
Table 2: IN, ID, DD parameters example
Page
1 5
Comment
Description
INSTALLATION
M
ANUAL