ICE-‐ENTRY-‐100
LOGI
ALC
♦ Remote programming by SMS
;LOGN=5;LOGI=0;ALC=1;
9.12
These commands can only be issued only over SMS message, and are used to
control some special functions of ICE-ENTRY-100 device.
9.12.1 ORC command
Command is used to control outputs directly via SMS message
9.12.2 SDCLR command
To clear all data on SIM card SDCLR command is used.
9.12.3 LCRL command
Command clears log on ICE-ENTRY-100 device.
9.12.4 CLPCLR command
Command is used to delete all CLP numbers.
9.12.5 MRES command
Command is used to manually restart GSM module on ICE-ENTRY-100 device.
9.12.6 SSRES command
Command is used to manually restart ICE-ENTRY-100 device.
0
Nonvolatile memory on ICE-ENTRY-100
1
Log is auto cleared when full
Table 25: LOG parameters example.
SPECIAL SMS COMMANDS
Page
3 7
INSTALLATION
M
ANUAL