Table of Contents
Advertisement
ICE-‐ENTRY-‐100
♦ Remote programming by SMS
;IN1=0;IN2=4;ID1=10;ID2=0;DD1=0;DD2=15;
9.1.2 REMOTE REPORTING ALARM EVENTS
Parameters used to define the way to report the alarm event.
NOTE
ICE-ENTRY-100 device send SMS messages for reporting alarm events.
9.1.2.1
TN parameter
Telephone numbers for remote alarm reporting are listed as TN parameters.
Remote alarm reporting on ICE-ENTRY-100 is done via SMS messages.
9.1.2.2
LN parameter
This parameter is used to link alarm event from inputs or any other source to the
telephone numbers from TN list.
9.1.2.3
LOT parameter
LOT parameter is used to define the time control for voice calls. The start of voice
connection starts the LOT timer. If the voice connection is still ON when the LOT
timer expires ICE-ENTRY-100 disconnects voice connection.
9.1.2.4
Table of parameters
Name
TN1
TN2
TN3
TN4
TN5
LN1
1
st
telephone number
2
nd
telephone number
3
rd
telephone number
4
th
telephone number
5
th
telephone number
Input & telephone No. linking for 1
Page
1 6
Comment
st
alarm input (TN1 –
INSTALLATION
M
ANUAL
Advertisement
Table of Contents
