Table 3: Remote Alarm Reporting Parameters; Table 4: Remote Alarm Reporting Example - Transmitter Solutions iCE?Entry?100 Installation Manual

ICE-­‐ENTRY-­‐100
LN2
LN3
LN4
LN5
LN6
LOT
Note:
When telephone number (calling or messaging ICE-ENTRY-100) is not on the CLIP
list, not acknowledge event occurs (NAC). The telephone number responsible for
this event can be send to TN user for notification.
Example:
♦ Direct programming on the SIM card
Name
TN1
LN1
LN2
LN5
LOT
♦ Remote programming by SMS
;TN1=042376678;LN1=13;LN2=1234;LN5=1;LOT=60;
TN5)
Input & telephone No. linking for 2
– TN5)
Periodic test SMS. No. linking (TN1 – TN5)
SIM card refill. No. linking (TN1 – TN5)
NAC list. No. linking (TN1 – TN5) ( see note)
Log status. No. linking (TN1 – TN5)
Time out for GSM connection.

Table 3: Remote alarm reporting parameters

ICE-ENTRY-100 PROGRAMMING TABLE
SIM CARD PHONE BOOK
Number
042376678 1st telephone number
13 Input 1 reports alarm to TN1 & TN3
Input 2 reports alarm to TN1 & TN2 & TN3 &
1234
TN4
1 NAC event sent to TN1
Voice connection stay valid for max of 60s,
after this time
60 Voice connection breaks

Table 4: Remote alarm reporting example

nd
Description
Page 1 7
INSTALLATION M
alarm input (TN1
ANUAL