Table 22: Clip Parameters - Transmitter Solutions iCE?Entry?100 Installation Manual

ICE-­‐ENTRY-­‐100
9.10.1 CLPEN parameter
Parameter used to enable CLIP functionality.
9.10.2 CLPOU parameter
Parameter used to choose which output will be controlled by the CLIP
functionality.
9.10.3 CLPI parameter
This parameter, if set, is a precondition for CLIP function to control the output.
9.10.4 CLP1 ... CLP20 parameter
Set of telephone number, which can control the output. The number not on CLP
list is not able to control the output using clip functionality.
9.10.5 Table of parameters
Name
CLPEN
CLPOU
CLPI
CLP1
CLP20
Example:
♦ Direct programming on the SIM card
Enable CLIP functionality
Control output pin when CLIP event
CLIP input activation condition
CLIP number 1
. .
. .
. .
CLIP number 20

Table 22: CLIP parameters.

ICE-ENTRY-100 PROGRAMMING TABLE
Comment
Page 3 4
INSTALLATION M ANUAL