ICE-‐ENTRY-‐100
10.16
PARAMATERS
By sending this command to ICE-ENTRY-100 you receive SMS message with all
currently programmed button 1 group parameters ( KPAx, KPBx, KPNx, KP0x,
KPTx):
;PKP;
User can use ;PKP=x,y; to limit the number of call groups to be printed.
x = start group
NOTE
y = end group
Example
;Pkp=1, 10; Prints first 10 call groups settings
10.17
By sending this command to ICE-ENTRY-100 you receive SMS message with all
currently programmed trade button settings:
;PTB;
10.18
By sending this command to ICE-ENTRY-100 you receive SMS message with Credit
amount on your prepaid SIM card:
;PCCX;
Where X is the number of programmed prepaid card provider.
10.19
By sending this command to ICE-ENTRY-100 you receive SMS message with
current outputs state.
;PORC;
RECEIVE INTERCOM CALL GROUPS
RECEIVE TRADE BUTTON PARAMETERS
STATE OF THE CREDIT FOR THE PREPAID CARD
STATE OF THE OUTPUTS (PORC)
Page
4 2
INSTALLATION
M
ANUAL