Chapter 5: Manager Mode; Using Manager Mode; Manager Mode Overview - Matrix T5X-07 Service Manual

5.1 USiNG maNaGer mode

1)
To enter Manager Mode, press & hold INCLINE DOWN and
SPEED DOWN at the same time for 3-5 seconds until Manager
Mode appears on the display.
2) To enter the Manager Mode, press ENTER once Manager
Mode appears on the display.
3) To scroll between programs in the Manager Mode, press any
UP or DOWN arrow key.
4) Press ENTER to modify the program settings once displayed.
5) Press any UP or DOWN arrow key to change value.
6) Once program setting is correct, press ENTER to save.
7) Press the EMERGENCY STOP to exit Manager Mode..

5.2 maNaGer mode oVerVieW

CUSTom
SeTTiNGS
MAXIMUM TIME
DEFAULT TIME
DEFAULT LEVEL
DEFAULT AGE
DEFAULT WEIGHT
ACCUMULATED
DISTANCE
ACCUMULATED
TIME
SOFTWARE
START SPEED
MAXIMUM SPEED
DEFAULT CHANNEL
SPEED MODE
OUT OF ORDER
GENDER
LANGUAGE
SOUND MODE
NAVY TEST SITE
PAUSE TIME
BELT STOP
HRT SPEED BASED
12

CHaPTer 5: maNaGer mode

defaUlT miNimUm
60 5 99
60 5 99 (LIMITED
TO MAX TIME
SETTING)
1 1 10
30 15 100
150 LB / 68 50LB/23KG 400LB/182KG
KG
N/A N/A 65,000 MILES /
104,000KM
N/A N/A 65,000 HOURS
N/A N/A N/A
0.5 MPH / 0.5 MPH / 0.8 1.4MPH/2.3KPH
0.8KPH KPH
12 MPH / 20 2.0 MPH / 3.2 12MPH/20KPH
KPH KPH
1 1 30
MILE MILE KILOMETER
NO NO YES
MALE MALE FEMALE
ENGLISH N/A N/A
ON ON OFF
0 0 1
5 MINUTES 30 SECONDS 5 MINUTES
OFF OFF 90
OFF ON OFF
maximUm UNiT
MINUTE
MINUTE
LEVEL
AGE
POUND /
KILOGRAM
MILE/KILOMETER
HOUR
N/A
MPH/KPH
MPH/KPH
CHANNEL
N/A
N/A
N/A
N/A
N/A
N/A
MINUTE / SECOND
SECONDS
OFF
DESCRIPTION
Maximum workout duration.
Default start time in all programs.
Default start level in all programs.
Default age used in HR programs.
Default weight used in calorie calculations and
HR programs.
Total distance on treadmill, not editable. TO
RESET: Press and hold INCLINE DOWN and
SPEED DOWN for 3-5 seconds.
Total time on treadmill, not editable. TO RESET:
Press and hold INCLINE DOWN and SPEED
DOWN for 3-5 seconds.
Software Version, not editable.
Controls the starting speed for all programs
(does not affect minimum speeds).
Controls the maximum speed for all programs.
Controls the default channel for entertainment
wired through the C-Safe port.
Measurement unit used for calorie calculations,
distance, and speed.
Locks the machine.
Sets the user's gender.
Sets the language shown on the console.
Controls whether the display broadcasts chime
when buttons are pressed.
This option controls the default altitude used in
the fitness test score calculations.
0: Test site elevation less than 5000 ft above
sea level.
1: Test site elevation more than 5000 ft above
sea level.
Controls the maximum time the treadmill can be
paused during a workout.
Belt Stop function for user's existence detect.
This option allows the user to choose speed
based target heart rate programs.