1. Manuals
  2. Brands
  3. AXIOMTEK Manuals
  4. Motherboard
  5. MANO882 series
  6. User manual

AXIOMTEK MANO882 series User Manual

Intel socket 1150 xeon e3/ core i7/ i5/ i3/ celeron processor mini itx board with hdmi/ vga/ lvds/ displayport
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MANO882 Series
®
®
TM
Intel
Socket 1150 Xeon
E3/ Core
®
i7/ i5/ i3/ Celeron
Processor Mini
ITX Board with HDMI/ VGA/ LVDS/
DisplayPort
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MANO882 series and is the answer not in the manual?

Questions and answers

Related Manuals for AXIOMTEK MANO882 series

Summary of Contents for AXIOMTEK MANO882 series

  • Page 1 MANO882 Series ® ® Intel Socket 1150 Xeon E3/ Core ® i7/ i5/ i3/ Celeron Processor Mini ITX Board with HDMI/ VGA/ LVDS/ DisplayPort User’s Manual...

  • Page 2: Disclaimers

    Axiomtek does not make any commitment to update the information in this manual. Axiomtek reserves the right to change or revise this document and/or product at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Axiomtek Co., Ltd.

  • Page 3: Esd Precautions

     Wear a wrist-grounding strap, available from most electronic component stores, when handling boards and components. Trademarks Acknowledgments Axiomtek is a trademark of Axiomtek Co., Ltd. ® Windows is a trademark of Microsoft Corporation. AMI is a trademark of American Megatrend Inc.

  • Page 4: Table Of Contents

    Table of Contents Disclaimers ..................... ii ESD Precautions ................... iii Chapter 1 Introduction ..........1 Features ....................1 Specifications ..................2 Utilities Supported ................3 Chapter 2 Board and Pin Assignments ....5 Board Dimensions and Fixing Holes ..........5 Board Layout ..................
  • Page 5 2.4.19 SATA 3.0 Connectors (SATA1~SATA4) ............. 23 Chapter 3 Hardware Installation ......25 Installing the Processor ..............25 Installing the Memory ............... 31 Chapter 4 Hardware Description ......33 Microprocessors ................33 BIOS ....................33 System Memory ................. 33 I/O Port Address Map ................ 34 Interrupt Controller (IRQ) Map ............
  • Page 6 iAMT Settings ....................83 iAMT Web Console ..................86...

  • Page 7: Chapter 1 Introduction

    MANO882 Series Mini ITX Board Chapter 1 Introduction ® ® The MANO882 with C226 is a Mini ITX board based on Intel Xeon E3/ Core i7/ i5/ i3 and ® Celeron desktop processors in LGA1150 socket; supporting 22nm technology. The board ®...

  • Page 8: Specifications

    MANO882 Series Mini ITX Board Specifications  ® ® ®  Intel Xeon E3/ Core i7/ i5/ i3/ Celeron desktop processors.  System Chipset ®  Intel C226.  CPU Socket  LGA1150 socket.  BIOS  AMI BIOS via SPI interface with socket.

  • Page 9: Utilities Supported

    MANO882 Series Mini ITX Board  Power Management  ACPI (Advanced Configuration and Power Interface).  Form Factor  Mini ITX form factor. All specifications and images are subject to change without notice. The PCI-Express x16 slot supports riser card with up to 2 PCI-Express x8.
  • Page 10 MANO882 Series Mini ITX Board This page is intentionally left blank. Introduction...

  • Page 11: Board And Pin Assignments

    MANO882 Series Mini ITX Board Chapter 2 Board and Pin Assignments Board Dimensions and Fixing Holes Top View Board and Pin Assignments...
  • Page 12 MANO882 Series Mini ITX Board Bottom View I/O Bracket Board and Pin Assignments...

  • Page 13: Board Layout

    MANO882 Series Mini ITX Board Board Layout Top View I/O Bracket Board and Pin Assignments...

  • Page 14: Jumper Settings

    And remove jumper clip from 2 jumper pins to open. The following illustration shows how to set up jumper. Before applying power to MANO882 Series, please make sure all of the jumpers are in factory default position. Below you can find a summary table and onboard default settings.

  • Page 15: Audio Output Selection (Jp1)

    MANO882 Series Mini ITX Board 2.3.1 Audio Output Selection (JP1) Use this jumper to select line-out or speaker-out as source of audio output on audio connector. When speaker-out is used, it delivers 1W/channel continuous at 8Ω loads. Function Setting Line-out (Default)

  • Page 16: Lvds +12V Voltage Selection (Jp7) (Optional)

    MANO882 Series Mini ITX Board 2.3.5 LVDS +12V Voltage Selection (JP7) (Optional) The board supports voltage selection for flat panel displays. Use JP7 to set LVDS connector (CN19) pin 1~6 VCCM to +12V level. To prevent hardware damage, before connecting please make sure that the input voltage of flat panel is correct.

  • Page 17: Connectors

    MANO882 Series Mini ITX Board Connectors Signals go to other parts of the system through connectors. Loose or improper connection might cause problems, please make sure all connectors are properly and firmly connected. Here is a summary table which shows all connectors on the hardware.

  • Page 18: Audio Jack (Cn1)

    MANO882 Series Mini ITX Board 2.4.1 Audio Jack (CN1) The board provides HD audio jack on the rear I/O. Install audio driver, and then attach audio devices to CN1. Pin Color Signal Green Line-out Pink MIC-in 2.4.2 DisplayPort Connector (CN2) The DisplayPort interface is available through CN2.

  • Page 19: Com1 And Com2 Connector (Cn3)

    MANO882 Series Mini ITX Board 2.4.3 COM1 and COM2 Connector (CN3) CN3 is a double-deck DB-9 connector. Both CN3A (for COM1) and CN3B (for COM2) come with power capability on DCD and RI pins by setting jumpers (see section 2.3.2).

  • Page 20: Lan And Usb Connectors (Cn6 And Cn7)

    MANO882 Series Mini ITX Board 2.4.6 LAN and USB Connectors (CN6 and CN7) The board comes with two high performance plug and play ethernet interfaces (RJ-45) which are fully compliant with the IEEE 802.3 standard. Connection can be established by plugging one end of the ethernet cable into this RJ-45 connector and the other end to a 1000/100/10-Base-T hub.

  • Page 21: Hdmi Connector (Cn8)

    MANO882 Series Mini ITX Board 2.4.7 HDMI Connector (CN8) The HDMI (High-Definition Multimedia Interface) interface is available through this connector. Signal Signal HDMI OUT_DATA2+ HDMI OUT_DATA2- HDMI OUT_DATA1+ HDMI OUT_DATA1- HDMI OUT_DATA0+ HDMI OUT_DATA0- HDMI OUT_Clock+ HDMI OUT_Clock- N.C. N.C.

  • Page 22: Full-Size Pci-Express Mini Card And Msata Connector (Cn11)

    MANO882 Series Mini ITX Board 2.4.9 Full-size PCI-Express Mini Card and mSATA Connector (CN11) This is a PCI-Express Mini Card connector applying to either PCI-Express or USB 2.0 or SATA (mSATA). It complies with PCI-Express Mini Card Spec. V1.2. It can also support mSATA card.

  • Page 23: Internal Usb 3.0 Connector (Cn12)

    MANO882 Series Mini ITX Board 2.4.10 Internal USB 3.0 Connector (CN12) The CN12 is a 19-pin internal connector for installing versatile USB 3.0 compliant peripherals. Signal Signal VBUS0 SSRX3- VBUS1 SSRX3+ SSRX4- SSRX4+ SSTX3- SSTX3+ SSTX4- SSTX4+ USB6- USB6+ USB7- USB7+ 2.4.11...

  • Page 24: Internal Usb 2.0 Connectors (Cn14 And Cn17)

    MANO882 Series Mini ITX Board 2.4.12 Internal USB 2.0 Connectors (CN14 and CN17) These are 2x5-pin internal connectors for installing versatile USB 2.0 compliant peripherals. These connectors are designed with +5V level standby power which can provide power when system is in suspend mode.

  • Page 25: Lvds Connector (Cn19)

    MANO882 Series Mini ITX Board 2.4.15 LVDS Connector (CN19) This board has a 2x20-pin connector for LVDS LCD interface. It is strongly recommended to use the matching JST SHDR-40VS-B connector for LVDS interface. Pin 1~6 VCCM can be set to +3.3V, +5V or +12V by setting JP8 or JP7 (see section 2.3.6 and 2.3.5).
  • Page 26 MANO882 Series Mini ITX Board 24-bit single channel 18-bit dual channel Pin Signal Pin Signal Pin Signal Pin Signal 1 VCCM VCCM VCCM VCCM VCCM VCCM VCCM VCCM VCCM VCCM VCCM VCCM EDID DATA EDID CLK EDID DATA EDID CLK...

  • Page 27: Front Panel Connector (Cn20)

    MANO882 Series Mini ITX Board 2.4.16 Front Panel Connector (CN20) Signal PWRLED+ EXT SPK- Buzzer PWRLED- N.C. N.C. EXT SPK+ PWRSW- PWRSW+ HW RST- HW RST+ HDDLED- HDDLED+ Power LED Pin 1 connects anode(+) of LED and pin 5 connects cathode(-) of LED. The power LED lights up when the system is powered on.

  • Page 28: Internal Com Connectors (Com3~Com6)

    MANO882 Series Mini ITX Board 2.4.17 Internal COM Connectors (COM3~COM6) The board comes with 2x5-pin connectors for COM3~COM6 serial port interfaces, see table below. Signal Data Carrier Detect (DCD) Data Set Ready (DSR) Receive Data (RXD) Request to Send (RTS)

  • Page 29: Sata 3.0 Connectors (Sata1~Sata4)

    MANO882 Series Mini ITX Board 2.4.19 SATA 3.0 Connectors (SATA1~SATA4) These Serial Advanced Technology Attachment (Serial ATA or SATA) connectors are for high-speed SATA interfaces. They are computer bus interfaces for connecting to devices such as hard disk drives. This board has four SATA 3.0 ports with 6Gb/s performance.
  • Page 30 MANO882 Series Mini ITX Board This page is intentionally left blank. Board and Pin Assignments...

  • Page 31: Chapter 3 Hardware Installation

    MANO882 Series Mini ITX Board Chapter 3 Hardware Installation ® Before installing the processor, please access Intel website for more detail information of Processor Integration Video (LGA1150): http://www.intel.com/support/tw/processors/sb/CS-030860.htm Installing the Processor The LGA1150 processor socket comes with a cover to protect the processor. Please install the...
  • Page 32 MANO882 Series Mini ITX Board Vertical removal is NOT recommended, as it requires higher force and can lead to socket contact damage. Note Never touch fragile socket contacts to avoid damage and do not touch processor sensitive contacts at any time during installation.
  • Page 33 MANO882 Series Mini ITX Board  Grasp the processor with thumb and index finger along the top and bottom edges. (Do not touch the orientation notches.) The socket will have cutouts for your fingers to fit into (see image below).
  • Page 34 MANO882 Series Mini ITX Board  Verify that package is within the socket body and properly connected to orientation keys.  Close the socket (see image below): 1. Gently lower the load plate. 2. Make sure load plate's front edge slides under the shoulder screw cap as the lever is lowered.
  • Page 35 MANO882 Series Mini ITX Board Screw the CPU cooling fan onto the board. Make sure the CPU fan is plugged to the CPU fan connector. Step5 Removing the processor:  Open the socket: Disengage the load lever. Open the load plate ...
  • Page 36 MANO882 Series Mini ITX Board Hold protective cover at 45 degree angle to the LGA1150 Socket. Carefully lower protective cover on hinge side first, to contact with the outside wall of the LGA1150 Socket: Engage protective cover retention features to outside of LGA1150 Socket, and align 2 cover corners to socket corners (This step is critical to avoid Bent Contact Damage!).

  • Page 37: Installing The Memory

    MANO882 Series Mini ITX Board Installing the Memory The board has two 204-pin DDR3 SO-DIMM memory sockets with maximum memory capacity up to 16GB. A DDR3 module has the same physical dimensions as a DDR2 SO-DIMM but is notched differently to prevent installation on a DDR2 SO-DIMM socket.
  • Page 38 MANO882 Series Mini ITX Board This page is intentionally left blank. Hardware Installation...

  • Page 39: Chapter 4 Hardware Description

    CPU from damages. BIOS The MANO882 Series uses AMI Plug and Play BIOS with a single SPI Flash. System Memory The MANO882 Series supports two 204-pin DDR3 SO-DIMM sockets for maximum memory capacity up to 16GB DDR3 SDRAMs.

  • Page 40: I/O Port Address Map

    MANO882 Series Mini ITX Board I/O Port Address Map ® ® ® The Intel Xeon E3/ Core i7 /i5 /i3 /Celeron processors communicate via I/O ports. Total 1KB port addresses are available for assigning to other devices via I/O expansion cards.
  • Page 41 MANO882 Series Mini ITX Board Hardware Description...

  • Page 42: Interrupt Controller (Irq) Map

    MANO882 Series Mini ITX Board Interrupt Controller (IRQ) Map The interrupt controller (IRQ) mapping list is shown as follows: Hardware Description...
  • Page 43 MANO882 Series Mini ITX Board Hardware Description...
  • Page 44 MANO882 Series Mini ITX Board Hardware Description...

  • Page 45: Memory Map

    MANO882 Series Mini ITX Board Memory Map The memory mapping list is shown as follows: Hardware Description...
  • Page 46 MANO882 Series Mini ITX Board This page is intentionally left blank. Hardware Description...

  • Page 47: Ami Bios Setup Utility

    MANO882 Series Mini ITX Board Chapter 5 AMI BIOS Setup Utility The AMI UEFI BIOS provides users with a built-in setup program to modify basic system configuration. All configured parameters are stored in a flash chip to save the setup information whenever the power is turned off.
  • Page 48 MANO882 Series Mini ITX Board Hot Keys Description  Left/Right The Left and Right <Arrow> keys allow you to select a setup screen. The Up and Down <Arrow> keys allow you to select a setup screen or  Up/Down sub-screen.

  • Page 49: Main Menu

    MANO882 Series Mini ITX Board Main Menu The first time you enter the setup utility, you will enter the Main setup screen. You can always return to the Main setup screen by selecting the Main tab. System Time/Date can be set up as described below.

  • Page 50: Advanced Menu

    MANO882 Series Mini ITX Board Advanced Menu The Advanced menu also allows users to set configuration of the CPU and other system devices. You can select any of the items in the left frame of the screen to go to the sub menus: ►...
  • Page 51 MANO882 Series Mini ITX Board  ACPI Settings You can use this screen to select options for the ACPI configuration, and change the value of the selected option. A description of the selected item appears on the right side of the screen.
  • Page 52 MANO882 Series Mini ITX Board  Trusted Computing This screen provides function for specifying the TPM settings. Security Device Support Enable or disable BIOS support for security device. The default setting is Disable. Current Status Information Display current TPM status information.
  • Page 53 MANO882 Series Mini ITX Board  CPU Configuration This screen shows the CPU information. Hyper-threading Enable or disable Hyper-Threading Technology, which makes a single physical processor perform multi-tasking function as two logical ones. Intel Virtualization Technology Allow a hardware platform to run multiple operating systems separately and simultaneously, enabling one system to virtually function as several systems.
  • Page 54 MANO882 Series Mini ITX Board  SATA Configuration In this Configuration menu, you can see the currently installed hardware in the SATA ports. During system boot up, the BIOS automatically detects the presence of SATA devices. SATA Controller(s) Use this item to enable or disable the SATA controller(s) feature.
  • Page 55 MANO882 Series Mini ITX Board  PCH-FW Configuration This screen displays ME Firmware information.  AMT Configuration Use this screen to configure AMT parameters. Intel AMT ® Enable or disable Intel Active Management Technology BIOS Extension. The default is Enabled.
  • Page 56 MANO882 Series Mini ITX Board  USB Configuration USB Devices Display all detected USB devices. AMI BIOS Setup Utility...
  • Page 57 MANO882 Series Mini ITX Board  NCT6106D Super IO Configuration You can use this screen to select options for the Super IO Configuration, and change the value of the selected option. A description of the selected item appears on the right side of the screen.
  • Page 58 MANO882 Series Mini ITX Board  Serial Port 1 (COM1) Serial Port Enable or disable serial port 1. The optimal setting for base I/O address is 3F8h and for interrupt request address is IRQ4. COM Mode Use this option to set RS-232/RS-485/RS-422 communication mode for serial port 1.
  • Page 59 MANO882 Series Mini ITX Board  Serial Port 2 (COM2) Serial Port Enable or disable serial port 2. The optimal setting for base I/O address is 2F8h and for interrupt request address is IRQ3. COM Mode Use this option to set RS-232/RS-485/RS-422 communication mode for serial port 2.
  • Page 60 MANO882 Series Mini ITX Board  NCT6106D HW Monitor This screen is for Smart Fan configuration and hardware health status monitoring. This screen displays the temperature of system and CPU, cooling fan speed in RPM and system voltages (VCORE, DDR_1.5V, +12V and +5V).

  • Page 61: Chipset Menu

    MANO882 Series Mini ITX Board Chipset Menu The Chipset menu allows users to change the advanced chipset settings. You can select any of the items in the left frame of the screen to go to the sub menus: ► PCH-IO Configuration ►...
  • Page 62 MANO882 Series Mini ITX Board  PCH-IO Configuration This screen allows you to set PCH parameters. PCIE Mini Card Function Set PCI-Express Mini Card to work as PCI-Express or mSATA. PCH LAN Controller Enable or disable PCH LAN controller. Wake on LAN Enable or disable Wake on LAN functionality.
  • Page 63 MANO882 Series Mini ITX Board  System Agent (SA) Configuration This screen shows System Agent version information and provides function for specifying related parameters. Graphics Configuration Use this item to configure graphics controller. NB PCIe Configuration Use this item for NB PCI-Express configuration.
  • Page 64 MANO882 Series Mini ITX Board  Graphics Configuration Primary Display Select which of IGFX/PEG/PCI graphics device should be primary display. Primary IGFX Boot Display Select the display device which will be activated during POST (Power-On Self Test). Secondary IGFX Boot Display Use this option to select secondary display device.
  • Page 65 MANO882 Series Mini ITX Board  NB PCIe Configuration PEG0 – Gen X Configure PEG0 B0:D1:F0 Gen1-Gen3. PEG1 – Gen X Configure PEG0 B0:D1:F1 Gen1-Gen3. PEG0/1 - ASPM Control ASPM support for the PEG0/1 device. AMI BIOS Setup Utility...
  • Page 66 MANO882 Series Mini ITX Board  Memory Information This screen shows the system memory information. AMI BIOS Setup Utility...

  • Page 67: Boot Menu

    MANO882 Series Mini ITX Board Boot Menu The Boot menu allows users to change boot options of the system.  Setup Prompt Timeout Number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting.  Bootup NumLock State Use this item to select the power-on state for the keyboard NumLock.

  • Page 68: Security Menu

    MANO882 Series Mini ITX Board Security Menu The Security menu allows users to change the security settings for the system.  Administrator Password This item indicates whether an administrator password has been set (installed or uninstalled).  User Password This item indicates whether an user password has been set (installed or uninstalled).

  • Page 69: Save & Exit Menu

    MANO882 Series Mini ITX Board Save & Exit Menu The Save & Exit menu allows users to load your system configuration with optimal or fail-safe default values.  Save Changes and Exit When you have completed the system configuration changes, select this option to leave Setup and return to Main Menu.
  • Page 70 MANO882 Series Mini ITX Board  Discard Changes Select this option to quit Setup without making any permanent changes to the system configuration. Select Discard Changes from the Save & Exit menu and press <Enter>. Select Yes to discard changes.

  • Page 71: Event Logs

    MANO882 Series Mini ITX Board Event Logs The Even Logs menu allows users to change the advanced Event Log settings and view Event Log. You can select any of the items in the left frame of the screen to go to the sub menus: ►...
  • Page 72 MANO882 Series Mini ITX Board  Change Smbios Event Log Settings This screen allows you to change Smbios Event Log settings. Smbios Event Log Enable or disable all features of Smbios Event Logging during boot. Erase Event Log Choose options for erasing Smbios Event Log. Erasing is done prior to any logging activation during reset.
  • Page 73 MANO882 Series Mini ITX Board  View Smbios Event Log Press <Enter> to view the Smbios Event Log records. AMI BIOS Setup Utility...
  • Page 74 MANO882 Series Mini ITX Board This page is intentionally left blank. AMI BIOS Setup Utility...

  • Page 75: Appendix A Watchdog Timer

    MANO882 Series Mini ITX Board Appendix A Watchdog Timer About Watchdog Timer After the system stops working for a while, it can be auto-reset by the watchdog timer. The integrated watchdog timer can be set up in the system reset mode by program.
  • Page 76 MANO882 Series Mini ITX Board Note: If N=00h, the time base is set to second. M = time value 00h: Time-out Disable 01h: Time-out occurs after 1 second 02h: Time-out occurs after 2 seconds 03h: Time-out occurs after 3 seconds FFh: Time-out occurs after 255 seconds If N=08h, the time base is set to minute.

  • Page 77: Appendix B Digital I/O

    MANO882 Series Mini ITX Board Appendix B Digital I/O Digital I/O Software Programming  I2C to GPIO PCA9554PW GPIO[3:0] is Output, GPIO[7:4] is Input.  I2C address: 0b0100100x.  IOBASE: 0xF040  Registers: Command byte Command Protocol Function Read byte...
  • Page 78 MANO882 Series Mini ITX Board Register 1: Output port register. This register reflects the outgoing logic levels of the pins defined as outputs by Register 3. Bit values in this register have no effect on pins defined as inputs. Reads from this register return the value that is in the flip-flop controlling the output selection, not the actual pin value.

  • Page 79: Appendix C Configuring Sata For Raid

    MANO882 Series Mini ITX Board Appendix C Configuring SATA for RAID Configuring SATA Hard Drive(s) for RAID Function Before you begin the SATA configuration, please prepare:  Two SATA hard drives (to ensure optimal performance, it is recommended that you use two hard drives with identical model and capacity).
  • Page 80 MANO882 Series Mini ITX Board Turn on your system, and then press the <Del> button to enter BIOS Setup during running 2.1. POST (Power-On Self Test). If you want to create RAID, just go to the Advanced Settings menu/SATA Configuration, select the “SATA Mode Selection”, and press <Enter> for more options.
  • Page 81 MANO882 Series Mini ITX Board Set DVD-ROM for First Boot Option under the Boot Settings menu to boot DVD-ROM after 2.2. system restarts. Save and exit the BIOS Setup. 2.3. Configuring SATA for RAID...
  • Page 82 MANO882 Series Mini ITX Board 3. Configuring RAID by the RAID BIOS. Enter the RAID BIOS setup utility to configure a RAID array. Skip this step and proceed if you do not want to create a RAID. After the POST memory testing and before the operating system booting, a message 3.1.
  • Page 83 MANO882 Series Mini ITX Board After entering the Create Volume Menu screen, you can type the disk array name with 3.3. 1~16 letters (letters cannot be special characters) in the item “Name”. When finished, press <Enter> to select a RAID level. There are three RAID levels: RAID0, 3.4.
  • Page 84 MANO882 Series Mini ITX Board Set the stripe block size. The KB is the standard unit of stripe block size. The stripe block 3.5. size can be 4KB to 128KB. After the setting, press <Enter> for the array capacity. After setting all the items on the menu, select Create Volume and press <Enter> to start 3.6.
  • Page 85 MANO882 Series Mini ITX Board When prompting the confirmation, press <Y> to create this volume, or <N> to cancel the 3.7. creation. After the creation is completed, you can see detailed information about the RAID Array in the Disk/Volume Information section, including RAID mode, disk block size, disk name, and disk capacity, etc.
  • Page 86 MANO882 Series Mini ITX Board Delete RAID volume If you want to delete a RAID volume, select the Delete RAID Volume option in Main Menu. Press <Enter> and follow on-screen instructions. Please press <Esc> to exit the RAID BIOS utility. Now, you can proceed to install a SATA driver controller and the operating system.

  • Page 87: Appendix D Iamt Settings

    MANO882 Series Mini ITX Board Appendix D iAMT Settings ® ® The Intel Active Management Technology (Intel iAMT) has decreased a major barrier to IT efficiency that uses built-in platform capabilities and popular third-party management and security applications to allow IT a better discovering, healing, and protection their networked computing assets.
  • Page 88 MANO882 Series Mini ITX Board You will be asked to change the password before setting ME. You must confirm your new password while revising. The new password must contain: (example: !!11qqQQ) (default value).  Eight characters  One upper case ...
  • Page 89 MANO882 Series Mini ITX Board iAMT Settings ® Select Intel iAMT configuration and press <Enter>. Select Network Setup to configure iAMT. iAMT Settings...
  • Page 90 MANO882 Series Mini ITX Board Select TCP/IP to get into Network interface and set it to Enabled. Get into DHCP Mode and set it to Disabled. iAMT Settings...
  • Page 91 MANO882 Series Mini ITX Board If DHCP Mode is disabled, set the following settings:  IP address  Subnet mask ® Go back to Intel iAMT Configuration, then select Activate Network Access and press <Enter>. Exit from MEBx after completing the iAMT settings.
  • Page 92 MANO882 Series Mini ITX Board iAMT Web Console From a web browser, please type http://(IP ADDRESS):16992, which connects to iAMT Web. Example: http://10.1.40.214:16992 To log on, you will be required to type in username and password for access to the Web.
  • Page 93 MANO882 Series Mini ITX Board Enter the iAMT Web. Click Remote Control, and select commands on the right side. iAMT Settings...
  • Page 94 MANO882 Series Mini ITX Board When you have finished using the iAMT Web console, close the Web browser. iAMT Settings...

Table of Contents