Delay Timer; Keep Warm - Wolfgang Puck BDRCRD010 Use & Care Manual

HSNDigitalRiceCooker:HSNDigitalRiceCooker

Delay Timer

The DELAY Timer function only works for the WHITE Rice and BROWN
Rice modes and can be set to delay cooking up to 15 hours.
1 Follow steps 1 – 5 of the WHITE & BROWN RICE section of this
manual on page 12.
2 Press the desired Rice function (WHITE or BROWN)
3 Press the DELAY button once and the TIMER Display will show
1 indicating a 1 hour delay before the unit starts the cooking cycle.
You can increase the DELAY timer in 1 hour increments by simply
pressing the DELAY timer repeatedly until the desired DELAY time
appears.
4 The DELAY timer will countdown in 1 hour increments. When the
DELAY time has elapsed the COOKING indicator light will illuminate
and the Rice will begin the cooking cycle.
NOTE: If you want to add time after the DELAY cycle has started press
the (POWER button) once, press the desired RICE mode and then
press the DELAY button repeatedly until the desired time is displayed.
Your Multi-Cooker is in DELAY mode when the selected Rice Cooker
function and the DELAY indicator lights are on.
1/11/11 4:14 PM Page 15
15

Keep Warm

Your Multi-Cooker will automatically switch to KEEP WARM mode after
any of the cooking functions (WHITE, BROWN, STEAM). If you
accidently turned your Multi-Cooker off and want to manually turn on
the KEEP WARM mode, press the KEEP WARM button once, you will
hear a short beep, followed by a second beep a few seconds later
indicating that your Multi-Cooker is in KEEP WARM mode.
When in KEEP WARM mode the KEEP WARM indicator will remain on,
the TIMER display will show two dashes and the COOKING indicator
light will remain off.
NOTE: Do not attempt to cook in KEEP WARM mode. The KEEP WARM
mode is not intended to reheat cold food. Only use KEEP WARM mode
for fully cooked, hot food.
16