Removing The Detachable Lid; Attaching The Detachable Lid - Wolfgang Puck BDRCRD010 Use & Care Manual

HSNDigitalRiceCooker:HSNDigitalRiceCooker

Removing the Detachable Lid

1
2
3
Figure 1
4
Figure 2
Figure 3
Silicone Gasket
Figure 4
1/11/11 4:14 PM Page 9
To remove the Detachable Lid, first
remove the Condensation Collector
located under the Lid hinge by pulling
it away from the Multi-Cooker Housing.
See Figure 1.
Remove the Detachable Lid by pushing
the Detachable Lid Stem in while lifting
the lid straight up. See Figures 2 and 3.
If needed, the Steam Valve can be
removed in order to rinse the steam
vent. To remove, turn it counter-
clockwise and lift straight up.
See Figure 4.
Do not attempt to remove the
Inner Lid or silicone gasket. See
Figure 4. Do not place the Removable
Lid in the dishwasher. Simply wash
the Inner Lid with warm soapy water
and rinse thoroughly.
Inner Lid
Steam Valve
9

Attaching the Detachable Lid

1 To attach the Detachable Lid, slide the
Lid Stem into the Lid Stem Receptacle
on the Multi-Cooker Housing. Push
straight down until the Lid clicks in
place. See Figure 6.
CAUTION: Ensure that your Lid Stem is
locked in place by attempting to
remove it by pulling straight up. A
Serious burn injury can occur if you try
Figure 6
to move your Multi-Cooker without the
Lid locked into place.
2 Replace the Condensation Collector by
pressing straight in over the Lid Stem
until snaps into place. See Figure 7.
Figure 7
10