Steam; Slow Cook - Wolfgang Puck BDRCRD010 Use & Care Manual

HSNDigitalRiceCooker:HSNDigitalRiceCooker
NOTE: The countdown timer will not start until the water has reached
the proper steaming temperature.
1 Pour 1 1/2 cups of water into the Inner Pot. See the Steaming Chart
on Page 19 for a reference on cooking times.
2 Place inner pot in the Multi-Cooker housing and place the steaming
basket in the pot.
3 Add ingredients to steaming tray and close the lid. The lid is properly
closed when it clicks.
4 Plug the cooker in. Press the
Multi-Cooker will cycle through all of the settings. Press the STEAM
button, you will hear a short beep indicating the selected mode and
the TIMER will display 10 minutes. To increase the time press the
STEAM button repeatedly after the first beep and the TIMER will
adjust in 1 minute increments. You can set the steaming time from
5 to 30 minutes. If you do not change the default time you will hear
a second beep a few seconds later and the COOKING indicator will
illuminate. Once the water reaches the proper temperature the
TIMER will start counting down from set time. You cannot change
the time once the COOKING indicator has illuminated. If you need to
adjust the time press the
STEAM button repeatedly until the desired time is selected. Ensure
that there is adequate water in the pot if extending the steaming
time..
5 At the end of the cooking process the Multi-Cooker will beep 5 times
and automatically switch to "KEEP WARM". The TIMER display will
show two dashes and the KEEP WARM indicator will illuminate. The
KEEP WARM function will continue until the unit is unplugged. The
cooking indicator does not illuminate during the KEEP WARM cycle.
NOTE: It is recommended that you remove your steamed food once
the set time has elapsed otherwise the food will continue to cook.
6 Open the Multi-Cooker by pressing the release button on the handle.
Be sure to open the lid facing away from you to avoid any hot steam.
7 After each use remove and clean the condensation collector, press
the (POWER button) until no lights are illuminated, and unplug
your Multi-Cooker from the outlet.
1/11/11 4:14 PM Page 13

Steam

(POWER button) once and the
(POWER button) once followed by the
13

Slow Cook

The SLOW COOK function allows for both a HIGH and LOW
temperature modes depending upon the number of hours selected.
For cooking times of 2 – 6 hours your Multi-Cooker will cook on HIGH
mode, and for cooking times of 7 – 10 hours your Multi-Cooker will cook
on LOW mode. If you require extra time in either mode once the time
has elapsed simply press the SLOW COOK button a second time and
set the additional time needed.
NOTE: For additional slow cook time the above rule still applies.
Additional time of 2 – 6 hours will be at the HIGH temperature setting.
If you want to add additional LOW temperature cooking set the time
between 7 and 10 hours and manually time the cooking process if less
than 7 hours.
To Slow Cook in HIGH mode select a cooking time between 2 and 6 hours.
To Slow Cook in LOW mode select a cooking time between 7 and 10 hours
1 Place ingredients in the pot according to recipe instructions.
2 Place the pot in the Multi-Cooker.
3 Close the lid. The lid is properly closed when it clicks.
4 Plug the cooker in. Press the (POWER button) once and the
Multi-Cooker will cycle through all of the settings. Press the SLOW
COOK button, you will hear a short beep indicating the selected
mode and the TIMER will display 2 hours. To increase the time press
the SLOW COOK button repeatedly after the first beep and the
TIMER will adjust in 1 hour increments. You can set the SLOW COOK
time from 2 to 10 hours. If you do not change the default time you
will hear a second beep a few seconds later, the COOKING indicator
will illuminate and the TIMER will start counting down from set time.
You cannot change the time once the COOKING indicator has
illuminated. If you need to adjust the time press the
button) once followed by the SLOW COOK button repeatedly until
the desired time is selected.
5 At the end of the cooking process the Multi-Cooker will beep 5 times
and automatically switch to "KEEP WARM". The TIMER display will
show two dashes and the KEEP WARM indicator will illuminate. The
KEEP WARM function will continue until the unit is unplugged
6 Open the Multi-Cooker by pressing the release button on the handle.
7 Be sure to open the lid facing away from you to avoid any hot steam.
8 After each use remove and clean the condensation collector, press
the (POWER button) until no lights are illuminated, and unplug
your Multi-Cooker from the outlet.
14
(POWER