Opener Features - Automatic Technology SecuraLift GDO-7V1 Owner's Installation Instructions Manual

Features
ThankyouforpurchasingtheATASecuraLift®Automatic
Garage Door Opener. This opener is designed to suit
sectional overhead and one piece tilt up doors. The
components and materials used in this opener are of
the latest technology and highest quality. Listed
below are some of the many features.
Operation
To open or close the door simply press the hand held transmitter, the wall mounted
transmitter, or optional wall switch for two seconds. During an open or close cycle
the door can be stopped by pressing the button while the door is in motion. The
next actuation will move the door in the opposite direction.
Hopping code
Every time a transmission is made from the remote transmitter a new security
code is generated. The number of possible code combinations is over 4.29
billion. This greatly enhances the security of the system. Code "grabbing" is made
a thing of the past.
S-alps (semi automatic limits positioning system)
The ALPS system does away with manual adjustment of the doors' limits position using
mechanical parts, such as cams and micro switches. During installation the hand held
transmitter can be programmed to set the door limits positions.
Anti travel electronic brakes
opener has anti travel electronic brake mechanism which ensure the opener stops the door at
exact location
ISS (intelligent safety obstruction system)
While the door is performing a close cycle, should it hit an obstacle or be restricted in some manner, it will
automatically reverse. The amount of force the door should encounter before reversing is automatically
adjusted by the doors control system during the initial installation of the automatic door opener. The door
will also stop if restricted whilst opening. The Safety Obstruction Force should be checked at least once a
month. See installation manual for instructions.
Security code store
The SecuraLift ® Garage Door Opener uses state of the art technology in storing your selected transmitter
security code. Up to 24 different transmitters can be stored in the openers memory.
6 GDO-7V1 SecuraLift® Owner Installation Instructions