Replacing The Fuses - Yamaha Tenere XT660Z Owner's Manual

Hide thumbs Also See for Tenere XT660Z:
Table of Contents

Advertisement

Replacing the fuses

To replace the fuses (XT660Z):
The main fuse and fuse box 1 (for indi-
vidual circuits) are located under the
seat. (See page 3-16.)
1. Main fuse
2. Spare main fuse
PERIODIC MAINTENANCE AND ADJUSTMENT
EAUS1934
ZAUM1269
1. Fuse box 1
2. Parking lighting fuse
3. Signaling system fuse
4. Headlight fuse
5. Ignition fuse
6. ECU fuse
7. Radiator fan motor fuse
8. Backup fuse
9. Spare fuse
To replace the fuses (XT660ZA):
The main fuse and fuse box 1 (for ABS
model only), which are in a different
and hard-to-reach location, must be
replaced by a Yamaha dealer.
Fuse box 2 (for ABS model only) and
fuse box 3 (for individual circuits) are
located under the seat. (See page
3-16.)
To access fuse box 2, pull it upward
and then open it.
ZAUM1247
1. Fuse box 2
2. ABS control unit fuse
3. Spare fuse
4. Fuse box 3
5. Parking lighting fuse
6. Signaling system fuse
7. Headlight fuse
8. Ignition fuse
9. ECU fuse
10.Radiator fan motor fuse
11.Backup fuse
If a fuse is blown, replace it as follows.
1. Turn the key to "OFF" and turn off
2. Remove the blown fuse, and then
6-31
the electrical circuit in question.
install a new fuse of the specified
amperage. WARNING! Do not
6

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tenere xt660za

Table of Contents