Multi-Function Display - Yamaha Tenere XT660Z Owner's Manual

Multi-function display

1. Tachometer
2. Speedometer
3. Odometer
4. Tripmeter/fuel reserve tripmeter
5. Clock
6. Fuel meter
7. "RESET" button
8. "SELECT" button
WARNING
Be sure to stop the vehicle before
making any setting changes to the
multi-function display.
settings while riding can distract the
operator and increase the risk of an
accident.
INSTRUMENT AND CONTROL FUNCTIONS
The multi-function display is equipped
EAUS1944
with the following:
 a speedometer (which shows the
riding speed)
 a digital tachometer (which shows
engine r/min)
 an odometer (which shows the to-
tal distance traveled)
 two tripmeters (which show the
distance traveled since they were
last set to zero)
 a fuel reserve tripmeter (which
shows the distance traveled since
the bottom segment of the fuel
meter started flashing)
 a clock
 a fuel meter
 a self-diagnosis device
TIP
EWA12313
 Be sure to turn the key to "ON" be-
fore using the "SELECT" and "RE-
SET" buttons.
 For the U.K. only: To switch the
Changing
speedometer and odometer/trip-
meter displays between kilome-
ters and
"SELECT" and "RESET" buttons
together, then while holding the
Tachometer
1. Tachometer
2. Tachometer red zone
The tachometer allows the rider to
monitor the engine speed and keep it
within the ideal power range.
When the key is turned to "ON", the ta-
chometer needle sweeps once across
the r/min range and then returns to
zero r/min in order to test the electrical
miles, push the
circuit.
3-6
buttons, turn the key to "ON".
When the digits start flashing,
push the "SELECT" button to
change between kilometers and
miles.
3