Fuel Tank Breather/Overflow Hose; Catalytic Converter - Yamaha Tenere XT660Z Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
Fuel tank breather/overflow
hose
3

1. Fuel tank breather/overflow hose

2. Hose clamp
Before operating the motorcycle:
 Check the fuel tank breather/over-
flow hose connection.
 Check the fuel tank breather/over-
flow hose for cracks or damage,
and replace it if necessary.
 Make sure that the end of the fuel
tank breather/overflow hose is not
blocked, and clean it if necessary.
 Make sure that the fuel tank
breather/overflow hose is routed
through the clamp.
EAUB1302

Catalytic converter

This model is equipped with a catalytic
converter in the exhaust system.
WARNING
The exhaust system is hot after op-
eration. To prevent a fire hazard or
burns:
 Do not park the vehicle near
possible fire hazards such as
grass or other materials that
easily burn.
 Park the vehicle in a place
where pedestrians or children
are not likely to touch the hot
exhaust system.
 Make sure that the exhaust sys-
tem has cooled down before
doing any maintenance work.
 Do not allow the engine to idle
more than a few minutes. Long
idling can cause a build-up of
heat.
3-15
EAU13434
NOTICE
Use only unleaded gasoline. The use
of leaded gasoline will cause unre-
EWA10863
pairable damage to the catalytic
converter.
ECA10702