Setting The Surr Back/Zone 2 Outputs - Onkyo TX-NR901 Instruction Manual

Zone 2—Continued

Setting the Surr Back/Zone 2 Outputs

This section explains how to set the PRE OUT SURR
BACK/ZONE 2 outputs and the SURR BACK/ZONE 2
SPEAKERS terminals for use as surround back outputs
or Zone 2 outputs.
DIMMER
2, 3
TV
INPUT
DISPLAY
1 Press the scroll wheel, and then
press the [SETUP] button.
If the Basic menu appears, use the
Down [
Menu, and press the [ENTER] button to
display the Advanced menu.
2
Use the Up/Down [
tons to select "0. Hardware
Setup," and then press the
ENTER
[ENTER] button.
The Hardware Setup menu appears.
ENTER
3
Use the Up/Down [
tons to select "2. Surr Back/
Zone2," and then press the
ENTER
[ENTER] button.
The Surr Back/ Zone2 menu appears.
0-2.Surr Back/Zone2
ENTER
a.Surr Back/Zone2
86
+
1 2 3
@. - ' / ABC DEF
TV CH
-
4 5 6
GHI JKL MNO
7 8 9
PQRS TUV WXYZ
TV VOL
+ 10
0 CLEAR
--/---
DIRECT TUNING
1
CUSTOM
MACRO ZONE 2
MODE INPUT
SLEEP
+
2–4
CH
ENTER VOL
DISC
-
1, 5
MUTING
REC STEP/SLOW RANDOM
] button to select Advanced
]/[
]/[
:Surr Back
Quit:[SETUP]
4
ENTER
5
Note:
• When the SURR BACK/ZONE 2 outputs (SPEAK-
ERS and PRE OUT) are set to Zone 2, listening modes
that need surround back speakers (i.e., Dolby Digital
EX, DTS-ES, and THX Surround EX) are not avail-
able.
• This procedure can also be performed by using the
] but-
TX-NR901's [SETUP] button, [
buttons, and [ENTER] button.
] but-
Use the Up/Down [ ]/[
tons to select "a. Surr Back/
Zone2," and use the Left/Right
[ ]/[ ] buttons to select:
Surr Back: Use the SURR BACK/
ZONE 2 outputs (SPEAKERS and
PRE OUT) as surround back outputs.
Select this option when connecting a
receiver/integrated amp in Zone 2 (see
page 84).
Zone 2: Use the SURR BACK/
ZONE 2 outputs (SPEAKERS or PRE
OUT) for Zone 2.
Select this option when connecting a
power amp or only speakers in Zone 2
(see page 84).
Press the [SETUP] button.
The setup menu closes.
]/[ ]/[
] but-
]/[ ]