Input Setup; Digital Setup - Onkyo TX-NR901 Instruction Manual

Basic Setup—Continued

Input Setup

Digital Setup

This section explains how to assign digital inputs to
input sources. You only need to change these assign-
ments if you connect a component to a digital input other
than the default assignment listed in the following table.
For example, if you connect a DVD player to the DIGI-
TAL IN OPT 2 input, since the default DVD assignment
is COAX1, you would need to assign OPT2 to DVD.
Input source Default digital input
DVD
VIDEO 1
VIDEO 2
VIDEO 3
VIDEO 4
TAPE
PHONO
CD
Note:
If you connect a cassette recorder to the TAPE IN/OUT
sockets, you should change the TAPE assignment to
"----."
7 8
PQRS TUV
+ 10
0
--/---
CUSTOM
MACRO
MODE
DIMMER
3, 4
TV
INPUT
+
CH
ENTER
DISC
-
DISPLAY
REC STEP/SLOW
AUDIO SUBTITLE
SURR THX
1 Press the [INPUT] button, and
then roll the scroll wheel to select
INPUT
the input source you want to
assign.
Note:
There are no assignments for the
TUNER, VIDEO 5, and Net-Tune
input sources.
COAX1 (coaxial 1)
COAX2 (coaxial 2)
COAX3 (coaxial 3)
OPT3 (optical 3)
---- (No assignment)
OPT2 (optical 2)
---- (No assignment)
OPT1 (optical 1)
9
WXYZ
TV VOL
CLEAR
DIRECT TUNING
1, 2
ZONE 2
INPUT
1
SLEEP
3–5
VOL
2, 6
MUTING
RANDOM
ANGLE LAST M
All ST STEREO
2 Press the scroll wheel, and then
press the [SETUP] button.
The main menu appears onscreen.
3
Use the Up/Down [
tons to select "2. Input Setup,"
and then press the [ENTER] but-
ENTER
ton.
The Input Setup menu appears.
ENTER
4
Use the Up/Down [
tons to select "1. Digital Setup,"
and then press the [ENTER] but-
ENTER
ton.
The Digital Setup menu appears.
Advanced Menu
2.Input Setup
ENTER
2-1.Digital Setup
a.Digital Input
b.Digital Format
The name of the currently selected
input source appears next to "Input,"
"DVD" in this case.
5
Use the Up/Down [
tons to select "a. Digital Input,"
and then use the Left/Right [
ENTER
[ ] buttons to select a digital
input.
6
Press the [SETUP] button.
The setup menu closes.
Note:
• This procedure can also be performed by using the
input selector buttons, [SETUP] button, [
[ ]/[ ] buttons, and [ENTER] button.
]/[ ] but-
]/[ ] but-
Input:DVD
Input:DVD
:COAX1
:All
Quit:|SETUP|
]/[ ] but-
]/
]/[ ]/
45