Osd Setup; Osd Position; Naming Presets & Input Sources - Onkyo TX-NR901 Instruction Manual

Advanced Setup—Continued

4-3. OSD Setup

a. Background Color
With this preference you can select a background color
for the onscreen setup menus (OSD). The available col-
ors are: Blue 1, Blue 2, Green 1, Green 2, Magenta,
Red 1, or Red 2.
b. Component Video
This preference determines whether or not the onscreen
setup menus (OSD) are displayed on the TV connected
to the COMPONENT VIDEO OUTPUT.
OSD On: OSD displayed.
OSD Off: OSD not displayed.
c. Immediate Display
This preference determines whether or not actions, such
as selecting an input source, are displayed onscreen.
On: Actions displayed.
Off: Actions not displayed.
While a video signal from a video component is being
output, actions are not displayed onscreen even if this
preference is set to On.
d. Display Position
With this preference you can specify the position
onscreen where you want actions (Immediate Display)
to be displayed. There are ten positions from the top to
the bottom of the screen.

4-4. OSD Position

OSD Position
With this preference you can specify the position
onscreen where you want the onscreen setup menus
(OSD) to appear. Use the [
specify the position.
]/[ ]/[ ]/[ ] buttons to
Naming Presets & Input Sources
This section explains how to name radio presets and
input sources. Names may consist of up to 10 characters.
1 Press the [INPUT] button, and
INPUT
then roll the scroll wheel to select
the input source you want to
name.
If you want to name a radio preset,
select that preset.
2
Press the scroll wheel, and then
press the [SETUP] button.
The Basic menu appears onscreen.
3
Use the Up/Down [
tons to select "2. Input Setup,"
and then press the [ENTER] but-
ENTER
ton.
The Input Setup menu appears.
ENTER
4
Use the Up/Down [
tons to select "4. Character
Input," and then press the
ENTER
[ENTER] button.
The Character Input menu appears.
Advanced Menu
ENTER
2.Input Setup
2-4.Character Input
a.Character Display
b.Character
5
Use the Up/Down [
tons to select "a. Character Dis-
play," and use the Left/Right [
ENTER
[ ] buttons to select "Yes."
When this setting is set to No, the
default name is displayed. It must be set
to Yes to display your custom name.
]/[ ] but-
]/[ ] but-
Input:DVD
Input:DVD
:No
:
Press to edit.
to clear.
Quit:|SETUP|
]/[ ] but-
]/
73