Page 1
Contents AV RECEIVER Safety Information and Introduction ....2 TX-NR414 Table of Contents ...........6 Connections ..........12 Turning On & Basic Operations....19 Instruction Manual Advanced Operations ........39 Controlling Other Components....53 Appendix ............59 Internet Radio Guide Remote Control Codes...
Safety Information and Introduction 9. Do not defeat the safety purpose of the polarized or D. If the apparatus does not operate normally by grounding-type plug. A polarized plug has two blades following the operating instructions. Adjust only WARNING: with one wider than the other. A grounding type plug those controls that are covered by the operating TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, has two blades and a third grounding prong.
If water or any other liquid gets inside water. Dry the unit immediately afterwards with a reasonable protection against harmful interference in a this unit, have it checked by your Onkyo dealer. clean cloth. Don’t use abrasive cloths, thinners, residential installation.
Page 4
LARGE DE LA FICHE DANS LA BORNE 82194 GROEBENZELL, CORRESPONDANTE DE LA PRISE ET POUSSER GERMANY JUSQU’AU FOND. declare in own responsibility, that the ONKYO product described in this instruction manual is in compliance with the corresponding technical standards such as EN60065, For British models EN55013, EN55020 and EN61000-3-2, -3-3.
• Remove expired batteries as soon as possible to prevent damage from leakage or corrosion. Thank you for purchasing an Onkyo AV Receiver. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Receiver.
Turning Off ..............19 Controlling Other Components Playback ..............20 Playing the Connected Component ......20 iPod/iPhone Playback via Onkyo Dock ....53 Controlling Contents of USB or Network Devices ..21 Using the Onkyo Dock ..........53 Understanding Icons on the Display ......22 Controlling Your iPod/iPhone........
Safety Information and Introduction Front & Rear Panels Front Panel (North American and Taiwanese models) (European, Australian and Asian models) For detailed information, see the pages in parentheses. SETUP button (41) HYBRID STANDBY indicator (42) ON/STANDBY button (19) TUNING / , PRESET (27), cursor and PURE AUDIO button and indicator (European, ENTER buttons...
Safety Information and Introduction Display For detailed information, see the pages in parentheses. Input indicators (68) Z2 (Zone 2) indicator (52) HDMI indicator (49) 3D indicator DIGITAL indicator This lights when a 3D input signal is detected. ARC indicator (50) Headphone indicator (38) USB indicator (22, 23) and cursor indicators (22)
Safety Information and Introduction Rear Panel (North American, European, Australian and Asian models) (Taiwanese models) DIGITAL IN COAXIAL and OPTICAL jacks Composite video and analog audio jacks (BD/DVD IN, CBL/SAT IN, GAME IN, PC IN, COMPONENT VIDEO IN and OUT jacks TV/CD IN) ETHERNET port ZONE 2 LINE OUT jacks...
Receiver mode. RECEIVER). You can also use the remote controller to control Controlling the AV Receiver / buttons (27) Onkyo Blu-ray Disc/DVD player, CD player, and other components. D.TUN button (27) See “Entering Remote Control Codes” for more DISPLAY button details (➔...
Connections Connecting the AV Speaker Configuration Receiver The following table indicates the channels you should use Surround Surround depending on the number of speakers that you have. right left No matter how many speakers you use, a powered Connecting Your Speakers subwoofer is recommended for a really powerful and solid bass.
Page 13
Connections Speaker Connection Precautions • Don’t connect more than one cable to each speaker Using a Powered Subwoofer terminal. Doing so may damage the AV receiver. Read the following before connecting your speakers: • Don’t connect one speaker to several terminals. •...
Connections ■ AV Cables and Jacks Analog audio (RCA) About AV Connections Analog audio connections (RCA) carry analog audio. ■ HDMI Connecting AV components White HDMI connections can carry digital video and audio. HDMI cable : Video & Audio TV, projector, etc. Available sampling rate for PCM input signal (stereo/mono) is ■...
Connections Connecting Components with HDMI Satellite/cable set-top box, etc. Personal computer TV, projector, etc. Blu-ray Disc/DVD player Game console ■ See also: Audio Return Channel (ARC) function If your TV doesn’t support Audio Return Channel (ARC), you need to connect an optical digital cable together with the HDMI •...
Connections Connecting Your Components Note The on-screen menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected When USB input is selected, you can input video signals from to other video outputs, use the AV receiver’s display the AUX INPUT VIDEO jack.
Connections Connecting Onkyo Components Make sure that each Onkyo component is connected with an analog audio cable (connection in the hookup examples) (➔ page 16). Make the connection (see the illustration). If you’re using an RI Dock, or cassette tape deck, change the Input Display (➔...
Connections Connecting the Antennas Connecting the Power Cord This section explains how to connect the supplied indoor FM antenna and AM loop antenna. (Taiwanese models) The AV receiver won’t pick up any radio signals without any antenna connected, so you must connect the antenna to use Connect the supplied power cord to the AV the tuner.
Turning On & Basic Operations Turning On/Off the AV Turning On Turning Off Receiver ON/STANDBY on the front panel. ON/STANDBY on the front panel. Press Press ON/STANDBY Press RECEIVER followed by RECEIVER on the Press RECEIVER followed by RECEIVER on the remote controller.
(➔ page • “Remote Playback” (➔ page • “Listening to AM/FM Radio” (➔ page • “iPod/iPhone Playback via Onkyo Dock” (➔ page • “Controlling Other Components” (➔ page To adjust the volume, use VOL / . Select a listening mode and enjoy! See also: •...
Turning On & Basic Operations TOP MENU Controlling Contents of USB or This button displays the top menu for each media or service. This button stops playback. Network Devices / and ENTER MODE These buttons navigate through the menus. You can switch between Standard Mode and Extended Mode Press USB or NET first.
Turning On & Basic Operations Understanding Icons on the Display Playing an iPod/iPhone via USB • You can also use the / , ENTER and TUNING MODE buttons on the front panel. TUNING MODE allows you to This section describes icons that appear on the AV switch modes.
PC to the same iPod/iPhone or the USB device from the USB port. network as the AV receiver. Enter the MAC address of My Music Track your unit on the http://onkyo.vtuner.com/ portal. You Artist Great Artist Album My Favorite can then register your favorite radio programs.
Turning On & Basic Operations Registering Other Internet Radio • If you want to delete a station saved in “My Favorites” list, press MENU with the station selected or while the station is playing. You need to connect the AV receiver to your home Then, use / to select “Delete from My Favorites”...
Turning On & Basic Operations Windows Media Player 11 Setup Playing Music Files on a Server Use / to select an item, and then press ENTER or to start playback. This section explains how to configure Windows Media Player 11 so that the AV receiver can play the music files You need to connect the AV receiver to your home stored on your computer.
Turning On & Basic Operations Click “OK” to close the dialog box. Adjusting the Volume. Remote Playback This completes the Windows Media Player 12 You can adjust the volume by adjusting the volume configuration. bar in the “Remote playback” window. The default You need to connect the AV receiver to your home maximum volume level is 82 (0dB).
Turning On & Basic Operations ■ Tuning into Radio Stations Manual tuning mode Listening to AM/FM Radio In manual tuning mode, FM stations will be in mono. ■ Auto tuning mode This section describes the procedure of using the Press TUNING MODE so that the AUTO indicator buttons on the front panel, unless otherwise specified.
Page 28
Turning On & Basic Operations ■ Presetting AM/FM Stations Deleting Presets Using RDS (excluding North American and Taiwanese models) You can store a combination of up to 40 of your favorite Select the preset that you want to delete. AM/FM radio stations as presets. See the previous section.
Page 29
Turning On & Basic Operations ■ Listening to Traffic News (TP) RDS program types (PTY) Note Type Display • In some cases, the text characters displayed on the AV receiver You can search for stations that broadcast traffic news. may not be identical to those broadcast by the radio station. Also, None None unexpected characters may be displayed when unsupported...
Turning On & Basic Operations Using Basic Functions MOVIE/TV button This button selects the listening modes intended for use with movies and TV. Using the Listening Modes MUSIC button This button selects the listening modes intended for use Selecting Listening Modes with music.
Page 31
Turning On & Basic Operations About Listening Modes Input Source Speaker Layout The following audio formats are supported by the listening The illustration shows which speakers are activated in each The AV receiver’s listening modes can transform your modes. channel. See “Sp Config (Speaker Configuration)” for the listening room into a movie theater or concert hall, with speaker setup (➔...
Page 32
Turning On & Basic Operations ■ Onkyo-Original DSP Listening Modes Listening Mode Description Input Speaker Source Layout Listening Mode Description Input Speaker T-D (Theater- With this mode you can enjoy a virtual Source Layout Dimensional) surround sound even with only two or three...
Page 33
Turning On & Basic Operations ■ Listening Modes Listening Mode Description Input Speaker Source Layout Listening Mode Description Input Speaker In this mode, audio from the input source is Source Layout output without surround-sound processing. Pure Audio *1*2 In this mode, the display and video circuitry D T S The speaker configuration (presence of are turned off, minimizing possible noise...
Page 34
Turning On & Basic Operations Listening Mode Description Input Speaker Source Layout Neo:6 This mode expands any 2-channel source for up to 5.1-channel playback. It uses seven N e o N e o C i n e m a full-bandwidth channels of matrix decoding for matrix-encoded material, providing a N e o M u s i c...
Turning On & Basic Operations ■ ■ Network Service InstaPrevue Using the Home Menu With this selection, you can preview audio/video streams coming from HDMI inputs previously The Home menu provides quick access to frequently used You need to connect the AV receiver to your home assigned to input selectors (except for HDMI IN 6).
Turning On & Basic Operations Using the Sleep Timer Setting the Display Brightness Displaying Source Information With the sleep timer, you can set the AV receiver to turn You can adjust the brightness of the AV receiver’s display. You can display various information about the current off automatically after a specified period.
Muting the AV Receiver The Music Optimizer function enhances the sound quality You can temporarily mute the output of the AV receiver. When you connect an -capable Onkyo component, you of compressed music files. must configure the input display so that can work Press RECEIVER followed by MUTING.
Turning On & Basic Operations Using Headphones Connect a pair of stereo headphones with a standard plug (1/4 inch or 6.3 mm) to the PHONES jack. While the headphones plug is inserted in the PHONES jack, indicator lights. Note • Always turn down the volume before connecting your headphones.
Advanced Operations On-screen Setup Using the Quick Setup With the AV receiver connected to a TV, there are two ways of changing the settings on-screen: using the Quick Setup or the Setup Menu (HOME). Q u i c k S e t u p I n p u t ■...
Advanced Operations Speaker Levels Turn this setting on to reduce the dynamic range of Dolby Using the Audio Settings of Quick Digital material so that you can still hear quiet parts even Setup ■ when listening at low volume levels—ideal for watching Subwoofer Level movies late at night when you don’t want to disturb –15 dB to 0 dB to +12 dB in 1 dB steps...
Advanced Operations CinemaFILTER Explanatory Notes Using the Setup Menu (HOME) ■ Cinema Filter Menu Sp Config Remote ■ Subwoofer indicator Turn this setting on to soften overly bright movie soundtracks, which are typically mixed for reproduction in RECEIVER a movie theater. Menu selection CinemaFILTER can be used with the following listening Setting target...
Advanced Operations Menu item Setting target About the HYBRID STANDBY indicator Setup menu items Level Cal Left By way of optimized circuitry, this function reduces power (➔ page Center Menu item Setting target consumption when the AV receiver is in standby mode. Right HDMI Input BD/DVD...
Advanced Operations HDMI Input Component (Component Video Input) Note • If no video component is connected to HDMI output (even if the HDMI input is assigned), the AV receiver selects the video “Setup” “Setup” source based on the setting of “Component (Component Video Input)”.
Advanced Operations ■ Center , Surround Digital Audio (Digital Audio Input) Sp Config (Speaker Configuration) Small: Large: “Setup” “Setup” Select based on the cone diameter. None Menu Digital Audio Menu Sp Config Note If the “Front” setting is set to “Small”, the “Large” option If you connect a component to a digital audio input, you This section explains how to specify which speakers are cannot be selected.
Advanced Operations Sp Distance (Speaker Distance) Level Cal (Level Calibration) Note • For a more accurate setting, look up the frequency response in the manuals supplied with your speakers and set accordingly. “Setup” “Setup” • Choose a higher crossover frequency if you want more sound from your subwoofer.
Advanced Operations Dolby Audio Adjust ■ ■ PL II Music (2ch Input) Neo:6 Music “Setup” These settings apply to only 2-channel stereo sources. Center Image Panorama 0 to 2 to 5 Menu Audio Adjust With this setting, you can specify by how much the front left and right channel output is attenuated in order to create With the Audio Adjust functions and settings, you can the center channel.
Advanced Operations Preset Name For Input Selector Audio Selector Source Setup ■ ■ Name Audio Selector “Setup” - - -, Blu-ray, DVD, HD DVD, VCR, DVR, Tivo, ARC: CableSTB, SAT STB, PS3, Wii, Xbox, PC, TV, CD, The audio signal from your TV tuner can be sent to Items can be set individually for each input selector.
1, 2, or 3 Auto Standby Normally, the AV receiver detects the signal format When several Onkyo components are used in the same ■ automatically. However, if you experience either of the room, their remote ID codes may overlap. To differentiate...
Advanced Operations ■ Audio TV Out • When the source equipment is connected with the HDMI Setup connection, it may malfunction if “HDMI Ctrl (RIHD)” is set to “On”. ■ “Setup” This preference determines whether the incoming audio HDMI Through signal is output from the HDMI output.
Advanced Operations ■ ■ Audio Return Ch (ARC) InstaPrevue Network Setup These settings apply to “InstaPrevue” of the Home menu and specify the preview display of HDMI Auto: (➔ page video streams. The audio signal from your TV tuner can be sent to “Setup”...
Page 51
Advanced Operations ■ ■ DHCP Network Standby Enable Disable This setting determines whether or not the AV receiver This setting enables or disables control over the network. uses DHCP to automatically configure its IP Address, When enabled, the NET indicator will be dimly-lit while Subnet Mask, Gateway, and DNS Server settings.
Advanced Operations Zone 2 Controlling Zone 2 Components Press ZONE2, then point the remote controller at ■ the AV receiver and press RECEIVER. In addition to the main listening room, you can also enjoy Operating on the AV receiver Zone 2 turns on, the Z2 indicator lights on the AV playback in another room, or as we call Zone 2.
• If you use your iPod/iPhone with any other accessories, comfort of your sofa. You can even use the AV receiver’s For the latest information on the Onkyo Dock iPod/iPhone playback detection may not work. remote controller to operate your iPod/iPhone.
). In this case, make an connection and DS-A2 RI Dock. enter the remote control code 81993 (with This button does not turn the Onkyo DS-A2 or DS-A2X RI ■ Dock on or off. Also, your iPod/iPhone may not respond the With the RI Control...
• Except for RECEIVER, TV, and the multi zone button, assigned. If the sequence is not successfully assigned, remote control codes from any category can be assigned for BD/DVD Onkyo Blu-ray Disc player (➔ page the remote indicator will flash once slowly.
Controlling Onkyo components without Remote Control Codes for Onkyo Resetting the REMOTE MODE Buttons If you want to control an Onkyo component by pointing the Components Connected via You can reset a REMOTE MODE button to its default remote controller directly at it, or you want to control an remote control code.
Controlling Other Components ■ TV operation Controlling Other Components Press the appropriate REMOTE Available buttons MODE button first. By pressing the REMOTE MODE button that’s been Number: 1 to 9, 0 , INPUT, TV VOL / , programmed with the remote control code for your MUTING Number: +10 component, you can control your component as described...
Page 58
Controlling Other Components ■ ■ DVD player / DVD recorder operation Satellite receiver / Cable receiver operation Press the appropriate REMOTE Available buttons Available buttons MODE button first. TOP MENU GUIDE Number: 1 to 9, 0 SOURCE Number: +10 DISPLAY / / / / / / ENTER...
If you can’t resolve the issue yourself, try resetting the ■ Make sure that the inputs and outputs of all 15-17 AV receiver before contacting your Onkyo dealer. Can’t turn on the AV receiver components are connected properly. To reset the AV receiver to its factory defaults, turn it Make sure that the power cord is properly plugged —...
Page 60
Appendix ■ Only the front speakers produce sound Depending on the input signal, some listening modes 30-34 With some CD and LD players, you won’t be able to — cannot be selected. playback DTS material properly even though your When the Stereo or Mono listening mode is selected, player is connected to a digital input on the AV only the front speakers and subwoofer produce ■...
Page 61
Move the AV receiver away from your TV or — connected. computer. If it’s an Onkyo component, make sure that the cable and analog audio cable are connected properly. If the video source is connected to a component video Listen to the station in mono.
Page 62
Appendix ■ There’s no video Zone 2 USB Device Playback Make sure that your iPod/iPhone model’s TV OUT — ■ ■ There’s no sound Can’t access the music files on a USB device setting is set to On. Make sure the correct input is selected on your TV or —...
Page 63
– The “HDMI Through” setting is set to other than You must use the buttons on the unit to make these “Off”. Onkyo is not responsible for damages (such as CD rental settings. – The “Network Standby” setting is set to “On”.
Onkyo recommends that you back up your important music files beforehand. • If you connect a USB hard disk drive to the USB port, Onkyo recommends that you use its AC adapter to power it. • USB hubs and USB devices with hub functions are not supported.
Page 65
ISP. If you are still unable to access the Internet, the DNS or proxy server may be temporarily down. Contact your ISP. Others Retry the update procedure from the beginning. If the error persists, please contact Onkyo Support (➔ page 67) and provide the error code.
Page 66
USB device, remove it first. this occurs, you can still view the update progress on Note Download the firmware file from the Onkyo web the AV receiver’s display. The on-screen display will • Never unplug or turn off the AV receiver during the update site.
Page 67
Case 3: The above-mentioned information is subject to change If an error occurs during the update process, disconnect without prior notice. Visit the Onkyo web site for the latest then reconnect the AC power cord and try again. update. Case 4: If an error occurs due to a wrong selection of input sources, turn off and on the AV receiver.
Appendix Connection Tips and Video Connection Formats Audio Connection Formats Video Signal Path Audio components can be connected by using any of the Video components can be connected by using any one of following audio connection formats: analog, optical, the following video connection formats: composite video, The AV receiver supports several connection formats for coaxial, or HDMI.
HDMI, is the name of the system control function found on • The AV receiver will enter standby mode when the power • Sharp TV of the TV is turned to standby. Onkyo components. The AV receiver can be used with ■ CEC (Consumer Electronics Control), which allows Players/Recorders •...
Page 70
Appendix ■ How to connect and setup Change each item in the “HDMI Setup” menu Operate with the remote controller. according to the following settings: (➔ page 57). For buttons that can be operated Confirm the connection and settings. • HDMI Ctrl (RIHD): On Note 1.
Appendix About HDMI Supported Audio Formats About Copyright Protection • 2-channel linear PCM (32–192 kHz, 16/20/24 bit) The AV receiver supports HDCP (High-bandwidth Digital Designed to meet the increased demands of digital TV, Content Protection) , a copy-protection system for digital HDMI (High Definition Multimedia Interface) is a new •...
Appendix Network/USB Features Consult your ISP if you have any problems with your Internet Network Requirements connection. • The AV receiver uses DHCP to configure its network settings ■ Ethernet Network automatically. If you want to configure these settings manually, Connecting to the Network For the best results, a 100Base-TX switched Ethernet see “Network Setup”...
Page 73
• Protected WMA music files on an MP3 player cannot be played. Web browser: Microsoft Internet Explorer 6 or • Onkyo accepts no responsibility whatsoever for the loss or Netscape 7.1 damage to data stored on a USB device when that device is used ■...
Page 74
Appendix ■ WAV (.wav or .WAV) Supported Audio File Formats About DLNA WAV files contain uncompressed PCM digital audio. For server playback and playback from a USB device, the The Digital Living Network Alliance is an international, • Sampling rates of 8 kHz, 11.025 kHz, 12 kHz, 16 kHz, AV receiver supports the following music file formats.
® , the DLNA Logo and DLNA CERTIFIED™ are trademarks, service marks, or certification marks of the Digital Music Optimizer™ is a trademark of Onkyo Corporation. Living Network Alliance.” Windows and the Windows logo are trademarks of the Microsoft group of companies.
Appendix Specifications Video Section General Input Sensitivity/Output Level and Impedance Power Supply (North American and Taiwanese) Amplifier Section AC 120 V, 60 Hz 1 Vp-p/75 Ω (Component Y) (European and Australian) 0.7 Vp-p/75 Ω (Component P AC 230 V, 50 Hz 1 Vp-p/75 Ω...
Page 77
Appendix ■ Video Outputs Component Composite MONITOR OUT ■ Audio Inputs Digital Optical: 2 Coaxial: 2 Analog BD/DVD, CBL/SAT, GAME, PC, TV/CD, ■ Audio Outputs Analog ZONE2 LINE OUT Subwoofer Pre Output 1 Speaker Outputs Main (L, R, C, SL, SR) Phones 1 (6.3 ø) ■...
Page 80
1301, 555 Tower, No.555 West NanJin Road, Jin an, Shanghai, China 200041, Tel: 86-21-52131366 Fax: 86-21-52130396 http://www.cn.onkyo.com/ Y1112-1 SN 29400992 (C) Copyright 2012 ONKYO SOUND & VISION CORPORATION Japan. All rights reserved. * 2 9 4 0 0 9 9 2 *...
Page 81
Using Internet Radio Using Internet Radio Using Multiple Accounts Pandora ® internet radio –Getting Started (U.S. only) ..........2 The AV receiver supports multiple user accounts, which means you can freely switch between several logins. Common Procedures in Internet Radio After registering user accounts, login is performed from Menu the “Users”...
If you are tired of a song, you can put the song to sleep Onkyo receiver and press enter to begin listening to and Pandora will not play it for one month.
You can play tracks from Genres, Top Artists, Top have one yet, you can create a new account at Albums, Top Tracks, New Releases, and Staff Picks. Enabled buttons: www.rhapsody.com/onkyo Rhapsody Channels: RANDOM, REPEAT If you have an existing Rhapsody account, select Listen to radio channels programmed by Rhapsody’s...
“Sign In”. Enter your user name and SiriusXM Internet Radio subscriptions are sold separately Your Onkyo AV receiver includes a free trial of SiriusXM password in the next keyboard screen, or in Web and are governed by the Sirius Terms and Conditions (see Internet Radio.
Last.fm is a music service that learns what you love... Tracks”, “Library” and “Neighbours”. If you have the existing Last.fm account, you can sign Your new Onkyo AV receiver is very clever. If you have a Account Info: in to your account to select “Sign in to your free Last.fm account, it will keep track of all the songs...
Using Internet Radio You can control the tracks with the buttons on the Using Slacker Personal Radio remote control. If you do not have an account, create one on the Enabled buttons: Slacker website (www.slacker.com) with your ■ Menu Items computer.
Using Internet Radio You can control the tracks with the buttons on the Using Mediafly remote control. If you do not have a Mediafly account, use / to Enabled buttons: select “Sign In” and then press ENTER. ■ Menu Items Note Ratings and favorites: The Sign in screen appears.
Page 89
Utilisation d’une webradio Utilisation d’une Utilisation de plusieurs comptes Pandora ® internet Radio –Pour commencer webradio (États-Unis uniquement)......2 L’ampli-tuner AV prend en charge plusieurs comptes utilisateur, ce qui signifie que vous pouvez librement commuter entre plusieurs connexions. Après avoir Procédures courantes dans le menu de Utilisation de Rhapsody (Etats-Unis enregistré...
Don’t play the song for a month : la création de votre compte et de vos stations, vous pouvez retourner à votre récepteur Onkyo et appuyez Si vous en avez assez d’une chanson, vous pouvez sur entrée pour écouter votre webradio Pandora mettre la chanson «...
RANDOM, REPEAT compte, vous pouvez en créer un à partir de meilleures pistes, des nouveautés et des sélections du www.rhapsody.com/onkyo Remarque personnel. Si vous possédez déjà un compte Rhapsody, • Sur les canaux Rhapsody, certaines touches ne fonctionnent Rhapsody Channels : sélectionnez «...
Si vous possédez déjà un compte SIRIUS, vous Les abonnements SiriusXM Internet Radio sont vendus Votre ampli-tuner AV Onkyo comprend un essai gratuit de pouvez y accéder en sélectionnant « Sign In ». séparément et sont subordonnés par les conditions Sirius SiriusXM Internet Radio.
Account Info : vous y connecter pour sélectionner « Sign in to your Votre nouvel ampli-tuner AV Onkyo est très intelligent. Si account ». Saisissez votre nom utilisateur et votre mot Vérifiez les informations de votre compte. vous avez un compte Last.fm gratuit, il garde une trace de de passe dans l’écran clavier suivant.
Utilisation d’une webradio Vous pouvez contrôlez les pistes avec les touches sur Utilisation de Slacker Personal Radio la télécommande. Si vous ne possédez pas de compte, créez-en un à Boutons activés : partir du site Web de Slacker (www.slacker.com) à ■...
Utilisation d’une webradio Utilisation de Mediafly Utilisez / pour sélectionner un épisode, puis appuyez sur ENTER ou pour démarrer la Si vous ne possédez pas de compte Mediafly, utilisez lecture depuis cette station. / pour sélectionner « Sign In », puis appuyez sur L’écran de lecture apparaît.
Page 97
Uso de Internet Radio Uso de Internet Radio Uso de múltiples cuentas Pandora ® Internet Radio –Primeros pasos (solo EE.UU.) ..........2 El receptor de AV permite múltiples cuentas de usuario, lo que quiere decir que se puede cambiar libremente Procedimientos comunes en el menú...
Don’t play the song for a month: receptor Onkyo y pulsar Enter para empezar a Si se cansa de una canción, puede “silenciarla” de PANDORA, el logotipo de PANDORA logo, y la imagen escuchar su radio por Internet personalizada de modo que Pandora no la reproduzca durante un mes.
Puede controlar las pistas con los botones del mando a todavía no tiene una, puede crear una nueva en distancia. Puede reproducir canciones por géneros, artistas www.rhapsody.com/onkyo principales, álbumes principales o canciones Botones activados: Si ya tiene una cuenta Rhapsody, seleccione “Sign in principales, novedades, selección del sitio.
Las suscripciones a SiriusXM Internet Radio se venden por seleccionando “Sign In”. Escriba su nombre de Su receptor de AV Onkyo incluye una prueba gratuita de separado y se rigen por las condiciones de Sirius (consulte usuario y contraseña en la pantalla de teclado que SiriusXM Internet Radio.
Si se suscribe podrá disfrutar de lo mejor de Last.fm Radio Consejo se reproduce. sin anuncios en su receptor de AV Onkyo sin necesidad de • Si desea utilizar múltiples cuentas de usuario, consulte “Uso Ban this track: un ordenador.
Uso de Internet Radio Puede controlar las pistas con los botones del Uso de Slacker Personal Radio mando a distancia. Si no tiene una cuenta, cree una en el sitio web de Botones activados: Slacker (www.slacker.com) con su ordenador. ■ Elementos del menú...
Uso de Internet Radio Puede controlar las pistas con los botones del Uso de Mediafly mando a distancia. Botones activados: Si no tiene una cuenta de Mediafly, utilice / para seleccionar “Sign In” y luego pulse ENTER. ■ Elementos del menú Nota Ratings and favorites: Califique el programo o episodio que se está...
Page 104
Uso de Internet Radio Y1112-1 SN 29400992IRUS (C) Copyright 2012 ONKYO SOUND & VISION CORPORATION Japan. All rights reserved. * 2 9 4 0 0 9 9 2 I R U S *...
Page 105
Using Internet Radio Using Internet Radio Using Multiple Accounts Using Last.fm Internet Radio ......2 The AV receiver supports multiple user accounts, which means you can freely switch between several logins. Common Procedures in Internet Radio After registering user accounts, login is performed from Menu the “Users”...
Page 106
Last.fm is a music service that learns what you love... Tracks”, “Library” and “Neighbours”. If you have the existing Last.fm account, you can sign Your new Onkyo AV receiver is very clever. If you have a Account Info: in to your account to select “Sign in to your free Last.fm account, it will keep track of all the songs...
Page 107
Internetradio verwenden Internetradio verwenden Verwendung mehrerer Konten Verwendung von Last.fm Internet Radio ..2 Der AV-Receiver unterstützt mehrere Nutzerkonten, was bedeutet, dass Sie frei zwischen mehreren Logins Allgemeine Verfahren bei den umschalten können. Nach der Anmeldung der Internetradio-Menüs Nutzerkonten wird das Login vom „Users“ Bildschirm aus vorgenommen.
Page 108
Die aktuellen Nutzungspreise und umfassende Infos sind Neighbourhood“ und „Your Recommendations“). unter www.last.fm/subscribe erhältlich Y1112-1 SN 29400992IREU (C) Copyright 2012 ONKYO SOUND & VISION CORPORATION Japan. All rights reserved. * 2 9 4 0 0 9 9 2 I R E U *...
Page 109
Remote Control Codes Remote Control Codes While holding down the REMOTE MODE button to which you want to assign a code, press and hold down [DISPLAY] (about 3 seconds). The REMOTE MODE button/Remote indicator lights. On Integra products, button names are capitalized. For example, “Remote Mode” button and “Display”...
Page 110
Remote Control Codes Codes de télécommande Códigos de control remoto Tout en maintenant enfoncé le bouton REMOTE MODE auquel vous souhaitez Manteniendo pulsado el botón REMOTE MODE para el cual desea introducir un associer un code, pressez et maintenez enfoncé le bouton [DISPLAY] (pendant código, pulse y mantenga presionado el botón [DISPLAY] (aproximadamente 3 environ 3 secondes).
Page 111
Remote Control Codes Codici del telecomando Fernbedienungscodes Tenendo premuto il tasto REMOTE MODE al quale si desidera assegnare il Halten Sie die REMOTE MODE-Taste gedruckt, fur die Sie den Code eingeben codice, premere e tenere premuto [DISPLAY] (per circa 3 secondi). mochten, und drucken Sie (ca.
Page 112
Remote Control Codes Afstandsbedieningscodes Fjärrstyrningskoder Houd terwijl u de REMOTE MODE toets ingedrukt houdt waarvoor u een code Håll ned knappen för det REMOTE MODE som du vill tilldela en kod samtidigt wilt toewijzen de [DISPLAY] toets ingedrukt (ongeveer 3 seconden). som du trycker och håller ned [DISPLAY] (i cirka 3 sekunder).
Page 117
Remote Control Codes Satellite Set Top Box Satellite Set Top Box Satellite Set Top Box Satellite Set Top Box Hama 01567 Leiko 01626 Pace 00847, 00853, 00887, Sat Industrie 01611 01175, 01323, 01356, Hanseatic 01100 Lemon 01334 SAT+ 01409 01423, 01662, 01693, Hirschmann 00173 Lenoxx...
Page 118
Remote Control Codes Satellite Set Top Box Satellite Set Top Box SAT/PVR Combination SAT/PVR Combination Star 00887 00642 BskyB 01175, 01662 Schneider 01206 Stream System 01300 00879, 01356 Bush 01645 Sedea Electronique 01206 Strong 00853, 00879, 01284, United 01251, 01626, 02418 Canal Satellite 02657 01175, 01662, 01693,...
Page 119
Remote Control Codes Television Television Television Television Akai 10178, 10556, 10037, Basic Line 10556, 10037, 10668, Casio 10037 Dick Smith 10698 10714, 10715, 10208, 11037 Electronics Cathay 10037 11675 Baur 10037, 10195, 10512 Digatron 10037 10037 Akiba 10037 Beaumark 10178 Digihome 11667 Centrum...
Page 120
Remote Control Codes Television Television Television Television Erres 10037 Genesis 10037 Hisense 10556, 10508, 10208, 10037 11363, 12098 10171 Genexxa 10037 11709 Hitachi 10150, 10178, 10037, 10037 10171, 11864, 11886 Jinfeng 10208 10634, 11037, 10508, Euroman 10037 Godrej 11585 Jinxing 10556, 10037, 10698 10499, 10578, 11576, Europa...