Deleting Remote Controller Modes; Assigning Remote Controller Modes - Onkyo TX-NR901 Instruction Manual

Using the Remote Controller with Other Components—Continued

Deleting Remote Controller Modes

You can delete remote controller modes that you don't
need, such as modes for components that you don't have.
The AMP mode cannot be deleted.
1
Press and hold the [CUSTOM]
CUSTOM
button for more than three sec-
onds.
The remote controller enters Custom
mode.
2
Roll the scroll wheel to select
"MODE," and then press the
scroll wheel.
3 Roll the scroll wheel to select
"DEL," and then press the scroll
wheel.
4 Roll the scroll wheel to select the
mode you want to delete, and
then press the scroll wheel.
If the mode is deleted successfully,
after "OK" has been displayed, the
DEL display (step 3) reappears.

Assigning Remote Controller Modes

With this function you can assign a remote controller
mode to an input source. This is useful when you con-
nect, say, a CD recorder to the TAPE IN/OUT sockets.
By assigning the CDR remote controller mode to the
TAPE input source, you can use the remote controller to
control the CD recorder.
1
Press and hold the [CUSTOM]
CUSTOM
button for more than three sec-
onds.
The remote controller enters Custom
mode.
2
Roll the scroll wheel to select
"MODE," and then press the
scroll wheel.
3 Roll the scroll wheel to select
"ASSIGN," and then press the
scroll wheel.
4
Roll the scroll wheel to select an
input source, and then press the
scroll wheel.
5
Roll the scroll wheel to select the
mode you want to assign to the
specified input source, and then
press the scroll wheel.
If the assignment is successful, after
"OK" has been displayed, the ASSIGN
display (step 3) reappears.
97