Loading Standard Trays And Optional Trays - Lexmark X644e User Manual

Loading standard trays and optional trays

The MFP has a 500-sheet standard tray. You may have also purchased one or more 250-sheet or
500-sheet optional trays or a 2000-sheet drawer. The steps for loading a 250-sheet tray or 500-sheet
tray are the same.
Note: The steps for loading a 2000-sheet drawer are different than the steps for loading
a 250-sheet tray or 500-sheet tray.
To load print media:
Note: Do not remove a tray when a job is printing or when the control panel green
indicator light is blinking. Doing so may cause a jam.
1
Remove the tray from the MFP, and place it on a flat, level surface.
2
Squeeze the side guide tab, and slide the guide to the outer edge of the tray.
3
Squeeze the rear guide tab, and slide the guide to the correct position for the size media you
are loading.
79