Installing Or Removing A Memory Card - Lexmark X644e User Manual

Installing or removing a memory card

Installation
Note: MFP or printer memory cards designed for other Lexmark MFPs or printers may
not work with this MFP.MFP or printer memory cards designed for other printers or
MFPs may not work with this MFP.
1
Remove the system board access cover. (See
Warning: MFP memory cards are easily damaged by static electricity. Touch something
metal such as the MFP frame before you touch a memory card.
2
Push open the latches on both ends of the memory card connector.
3
Unpack the memory card.
Avoid touching the connection points along the edge of the card. Save the packaging.
4
Align the notches on the bottom of the card with the notches on the connector.
5
Push the memory card firmly into the connector until the latches on either end of the
connector snap into place.
It may require some force to fully seat the card.
6
Make sure each latch fits over the notch on the end of the card.
Memory connector
Memory card
Accessing the MFP system
118
board.)