Setting The Paper Type And Paper Size; Loading The Multipurpose Feeder - Lexmark X644e User Manual

Setting the Paper Type and Paper Size

After setting the Paper Type and Paper Size to the correct values for the type and size used in the
trays, then any trays containing the same size and type are automatically linked by the MFP.
Note: If the size of the media you are loading is the same size of the media previously
loaded, do not change the Paper Size setting.
To change the Paper Size and Paper Type setting:
1
Make sure the MFP is on.
2
Press Menu on the control panel.
3
Touch Paper Menu.
4
Touch Paper Size.
5
Touch the left or right arrow to change the size for the desired tray.
6
Touch Submit.
7
Touch Paper Type.
8
Touch the left or right arrow to change the media type for the desired tray.
9
Touch Submit.
10
Touch the home icon.

Loading the multipurpose feeder

The multipurpose feeder can hold several sizes and types of print media, such as transparencies,
postcards, note cards, and envelopes. It can be used for single-page or manual printing or as an
additional tray.
Note: If you install an optional envelope feeder, you can still use the multipurpose feeder.
The multipurpose feeder can hold approximately:
• 100 sheets of 75 g/m
• 10 envelopes
• 75 transparencies
The multipurpose feeder accepts print media within the following dimensions:
• Width—69.85 mm (2.75 in.) to 215.9 mm (8.5 in.)
• Length—127 mm (5 in.) to 355.6 mm (14 in.)
The icons on the multipurpose feeder show you how to load the multipurpose feeder with paper, how
to turn an envelope for printing, and how to load letterhead paper for simplex and duplex printing. A
2
(20 lb) paper
83