Overland Storage NEO S-Series User Manual page 78

NEO S-Series User Guide
Figure 55 Date/time (RMI)
Changes that can be made are:
Clock Configuration
• Time (24 hour format) : hh:mm:ss
• Date: MM:DD:YYYY
• Clock Synchronization Configuration (SNTP):
Enable Clock Synchronization: check box=checked status means enabled and the unit will attempt to
o
synchronize its clock with an external time source, the following apply;
SNTP Server Address (IPv4): This is the IP address of the network SNTP time server, also Host name
o
and domain can be used and may be a maximum of 40 characters
UTC Time Zone Offset: This drop down menu allows the administrator to select the appropriate time
o
zone offset from so the time is displayed in the actual local time.
Daylight Saving Enabled: Provides for automatic offset of daylight savings time
o
6.4.7.9 Setting error Log mode
NOTE
The Log menu can be used to set behavior of the error log collection. Your service personal may ask you to alter
settings in this field during the diagnostic process. Default setting of logs is for continuous collection of logs with the
most recent events overwriting the oldest events (circular buffer).
10400645-001
Service personnel can only set the log configuration.
© 2014 Overland Storage, Inc. Page 78