Securing - Elation Vision Scan 250 Manual

Elation vision scan 250 moving light fixture
Table of Contents

Advertisement

Vision Scan 250™
hanging yoke as well as the safety cable rigging point in one unit (see the illustration
below). When mounting this fixture to truss be sure to secure an appropriately rated clamp
to the hanging yoke using a M10 screw fitted through the center hole of the hanging yoke.
As an added safety measure be sure to attached at least one properly rated safety cable to
the fixture using on of the safety cable rigging point integrated in the bracket assembly
Securing the VISION SCAN 250™
Regardless of the rigging option you choose for your VISION SCAN 250™ always be sure
to secure your fixture with a safety cable. The fixture provides a built-in rigging point for a
safety cable on the hanging bracket as illustrated above. Be sure to only use the
designated rigging point for the safety cable and never secure a safety cable to a carrying
handle.
©Elation Professional®
15
Vision Scan 250™

Advertisement

Table of Contents
loading

Table of Contents