Elation Vision Scan 250 Manual page 35

REC – Auto save function.
RUN – Program test mode.
RUN
- With the function "RUN", you can run your pre-made program. You can set
the number of steps under Step (S-01- S-48). You can edit the individual scenes under
Edit.
1. Access the main menu.
2. Tap the UP button until "EDIT" is displayed, press ENTER.
3. Tap the UP button until "RUN" is displayed, press ENTER.
4. "AUTO "is displayed. If you press the UP button it will show "S O U N ".
Select which one you want to activate, and press ENTER.
5. Press UP, to select "ALON" or "NAST". Which mean stand alone, and
master/slave mode.
6. Select a mode, and press ENTER to confirm.
7. Press MODE/ESC to return to the main menu.
STEP
- With this function you can program the number of
Program.
1. Access the main menu.
2. Tap the UP button until "EDIT" is displayed, press ENTER.
3. Tap the UP button until "STEP" is displayed, press ENTER.
4. The display shows "S-01," this indicates the first step of your program. You can
call up to 48 scenes in "Run." For example; if "S-05" is displayed, it means that
the scene will "RUN" the first 5 scenes you saved in "Edit."
5. Press ENTER to save and MODE/ESC to exit.
SC01
- This function allows you to choose the total number of scenes in your internal
program.
©Elation Professional® 35
Vision Scan 250™
steps in your individual
Vision Scan 250™