Elation Vision Scan 250 Manual page 33

1. Access the main menu.
2. Tap the UP button until "SPEC" is displayed, press ENTER.
3. Tap the UP button until "DFSE" is displayed, press ENTER.
4. The display will show "ON/OFF."
5. Press the UP button to display "ON" to activate this function, or "OFF" to
deactivate this function.
6. Press ENTER to confirm.
7. Press MODE/ESC to return to the main menu.
FANS
- This function is used to change the functionality of the internal cooling fans.
Follow the procedure below to access the fan menu:
1. Access the main menu.
2. Tap the UP or DOWN button until "SPEC" is displayed, press ENTER.
3. Tap the UP or DOWN button until "FANS" is displayed, press ENTER.
4. The display will show "HIGH/AUTO".
5. Press UP or DOWN button to select "HIGH" or "AUTO".
6. Press ENTER to confirm.
7. Press MODE/ESC to return to the main menu.
VER
- Use this function to display the Software version of the unit.
1. Access the main menu.
2. Tap the UP button until "SPEC" is displayed, press ENTER.
3. Tap the UP button until "VER" is displayed, press ENTER.
4. The display will show "V-1.0," the display may also show, "V-2.0," "V-9.9" etc.
5. Press ENTER or MODE/ESC to exit. EDIT - This menu item allows you to write
a program into the memory (EEPROM) via the control panel or via the external
controller.
ADJU
- This function is used to calibrate the various internal motors in the event the
©Elation Professional® 33
Vision Scan 250™
Vision Scan 250™