Elation Vision Scan 250 Manual page 28

8. RTLT MENU
- This menu function will reverse the mirror TILT movements.
1. Access the main menu.
2. Tap the UP button until"RTLT"is displayed, press ENTER.
3. The display will show"ON/OFF".
4. Press the UP button to select "O N " to activate this function, or " O F F " to
deactivate this function.
5. Press ENTER to confirm.
6. Press MODE/ESC to return to the main menu.
9. FINE MENU
This menu item switches between 16 bit (fine) and 8 bit (coarse) modes. When
-
this function is turned on the fixture will operate in 16 bit (fine) mode. When functioning in
16 bit mode the fixture will use 14 DMX channels, when the 16bit function is turned off the
fixture will use 12 DMX channels. To access the Fine menu follow the procedure below:
1. Access the main menu.
2. Tap the UP button until"FINE"is displayed, press ENTER.
3. The display will show"ON/OFF".
4. Press the UP button to select "O N " to activate this function, or " O F F " to
deactivate this function.
5. Press ENTER to confirm.
6. Press MODE/ESC to return to the main menu.
10. MIC MENU
This function allows for electronic control of the internal microphone's sound
-
sensitivity.
1. Access the main menu.
2. Tap the UP button until "MIC" is displayed and press ENTER.
3. The display will show "M-XX" (Where XX represents a value between 00 & 99).
4. Use the UP and DOWN button to adjust the mic sensitivity, 99 being the highest.
5. Press ENTER to confirm and lock your new setting in place.
©Elation Professional® 28
Vision Scan 250™
Vision Scan 250™