Mobile Rack (For Removable Hdd Model) - Santec SDVR-1/TX-S User Manual

6.2.2 Mobile Rack (FOR REMOVABLE HDD MODEL)

1.
Make sure that the key
is unlocked.
3.
Slide the top cover
backward and remove.
5.
Place the HDD inside
the mobile rack. Use
four of the provided
screws to fix the HDD
in place.
2.
Pull the active handle
outward to detach the
carrier body from the
mobile rack.
4.
Place the hard disk in
the rack.
6.
Place the top cover
back to the carrier body
by sliding forward to
secure.
7.
Slide the carrier body
back in the mobile rack.
9.
Push the active-handle
inward.
63
8.
Push the carrier body
further into the mobile
rack until fully inserted.
10.
Lock the Key.