Tcp/Ip Communication Setup - Santec SDVR-1/TX-S User Manual

5.1.3 TCP/IP Communication Setup

Follow the instructions below to install the
TCP/IP communication program into your
computer.
1
. Click the Start Menu from your computer,
and point to the Control panel.
2.
Click the Network Connections icon twice
to enter the Network setting windows.
Point to the Local Area Connection and click
the right bottom of the mouse. Click the
Properties
to enter
Connection.
3.
Click on the Configuration tag; check if
the TCP/IC is included among the network
component list. If the TCP/IP is included,
please process step 5. If it is not included,
please follow step 4 to install the TCP/IP.
4.
TCP/IP installation
During the installation, you will be requested
to insert the windows XP CD ROM. After
installation, the PC will be restarted.
43
Local Area
the