System Setting - Santec SDVR-1/TX-S User Manual

4.6 SYSTEM Setting

MAIN MENU
RECORD
ALARM / MOTION
CLOCK/ TIMER
COMMUNICATION
DISK
SYSTEM
GOTO SYSTEM PAGE
This page is used for accessing the history of the
operation statuses, setting the password, resuming
factory default, and determining the menu display
background.
OPERATION LOG:
MAIN MENU
RECORD
ALARM / MOTION
CLOCK/ TIMER
COMMUNICATION
DISK
SYSTEM
GOTO SYSTEM PAGE
OPERATION LOG
05/15/04 18:19:30
05/15/04 18:19:36
05/15/04 18:23:10
05/15/04 18:23:50
05/15/04 18:25:05
05/15/04 18:27:12
05/15/04 18:50:30
05/15/04 18:51:20
^ v SELECT <PAGE UP
This log shows the history of the operation
statuses in chronological order. What the
following entries represent is detailed below.
ON: Switches on the device.
OFF: Turns off the device.
REC: Starts recording.
STOP: Ceases recording.
STOP-P: Ceases playback.
PLAY: Shows recorded video.
SYSTEM
: ENTER
OPERATION LOG
MENU BACKGND : 2
BUZZER
: OFF
PASSWORD
: SET
SETUP PWD
: OFF
DEFAULT : LOAD
SD / CD SETUP
: SAVE
VERSION : ENTER
MAIN PAGE
ON
OFF
ON
REC
STOP
V-LOSS
PLAY
STOP-P
>PAGE DOWN
38
V-IN: Video input is connected.
V-LOSS: Video loss occurs.
P-LOSS: Power interruption occurs.
A-IN: Detects an alarm input.
LOCK: Disables the entire front panel
controls.
UNLOCK: Releases the key lock.
UPDATE: Updates system software.
Note: The log keeps an operation history on a
revolving basis because of a limit of 4000.
When the log is full, the newly registered
record of an operation will replace the
existing records from the oldest one
onwards.
MENU BACKGND:
3
There are levels of background color
transparency you can choose from: level 1 is
totally transparent, level 3 is opaque, and level
2 is between levels 1 and 3. The background
color is used in the setup menu and search
function.
BUZZER:
This option determines the embedded buzzer
sounding a tone to signal the following
situations. A tone lasts about two seconds.
ON: Enables buzzer.
OFF: Disables buzzer.
Situation
Alarm occurs
Video loss occurs
Disk is full
Load factory default
Buzzer is set to ON
Enables/disables the key lock function
Power on /off in a mobile rack HDD
Backup operation is complete
Timer activates/deactivates
Recording is switching between HDDs