Installation; Affix The Neck Strap To The Kdc100; Copy The Provided Programs Into Your Pc; Connect The Kdc100 Usb Connector To Your Pc - KoamTac KDC100 User Manual

Installation
Prior to installing the included software on your PC, verify that your system meets the minimum system
requirements.
1. Microsoft Windows operating system: XP or Vista
2. Free space on hard drive of 512 MB.
3. Accessible USB port for connecting KDC100 to your computer
4. 256M byte memory or larger.
Affix the neck strap to the KDC100
Use the included neck strap properly to avoid dropping the unit.
Fit the small thin cord of the strap around the pillar of the KDC100 and loop the thick cord of the strap through
the thin loop in order to attach the hand strap.
Wear the neck strap when carrying the product to avoid dropping the unit.
Do not swing the product around on the strap, since contact with another object may damage the unit and cause
it to malfunction.
Copy the Provided Programs into your PC
Create a directory for the KTSync program.
Copy the "KTSync.exe" program from the CD into the new directory on your hard drive.
It is recommend that you also copy "KTReader.inf" and "KDC100.User.Manual.2.2.pdf" into the same directory.
Connect the KDC100 USB connector to your PC
Connect KDC100 to PC USB port. Use the included USB extension cable if needed.
The "New hardware found" message will pop up.
Follow the prompts and select the option to search for the best driver for your device.
Please select the directory containing the "KTReader.inf" file and continue hardware installation procedure.
A message will pop-up that new hardware is found and recognized as a serial device.
Charge the battery
The battery is charged by connecting KDC100 to a USB port. It takes about two hours to fully charge the
battery. The front panel LED will illuminate in orange during the battery charge. The front panel LED will
illuminate in green upon charging the battery in full.