Copying Printer Settings To Other Printers; Restoring The Factory Default Settings - Lexmark E360D 420 User Manual

5
From the drop-down box for each supply, select among the options for notification. Explanations for each option
are provided.
6
Click Submit to save your selections.

Copying printer settings to other printers

Using the Embedded Web Server, you can copy printer settings to up to 15 other network printers.
1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then you can:
•
View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.
•
Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.
2
Click Copy Printer Settings.
3
To change the language, select a language from the drop-down list, and then click Click here to submit
language.
4
Click Printer Settings.
5
Enter the IP addresses of the source and target printers.
Note: To add additional target printers, click the Add Target IP button.
6
Click Copy Printer Settings.

Restoring the factory default settings

1
From the printer control panel, press
2
Press the arrow buttons until Settings appears, and then press
3
Press the arrow buttons until General Settings appears, and then press
4
Press the arrow buttons until Factory Defaults appears, and then press
5
Press the arrow buttons until Restore Now appears, and then press
Wait for Submitting Changes to appear momentarily, followed by Restoring Factory Defaults,
before the printer returns to Ready.
Warning—Potential Damage: Restore Now returns all printer settings to the factory default settings except
Network/Port menu settings. All downloads stored in RAM are deleted. Downloads stored in flash memory are
not affected.
.
Administrative support
91
.
.
.
.