Honor Init - Lexmark E360D 420 User Manual

Menu item
Protocol
Fastbytes
Standard

Honor Init

Off
On
Parallel Mode 2
On
Off
Mac Binary PS
Auto
On
Off
ENA Address
<xxx>.<xxx>.<xxx>.<xxx>
ENA Netmask
<xxx>.<xxx>.<xxx>.<xxx>
ENA Gateway
<xxx>.<xxx>.<xxx>.<xxx>
Description
Specifies the parallel port protocol
Notes:
•
Fastbytes is the factory default setting. It provides compatibility with most
existing parallel ports and is the recommended setting.
•
The Standard setting tries to resolve parallel port communication problems.
Determines whether the printer honors printer hardware initialization requests from
the computer
Notes:
•
Off is the factory default setting.
•
The computer requests initialization by activating the Init signal from the
parallel port. Many personal computers activate the Init signal each time the
computer is turned on.
Determines whether the parallel port data is sampled on the leading or trailing edge
of strobe
Note: On is the factory default setting.
Sets the printer to process Macintosh binary PostScript print jobs
Notes:
•
Auto is the factory default setting.
•
The Off setting filters print jobs using the standard protocol.
•
The On setting processes raw binary PostScript print jobs.
Sets the network address, netmask, and gateway information for an external print
server that is attached to the printer using a parallel cable
Note: This menu is available only if the printer is attached to an external print server
through the parallel port.
Sets the network address, netmask, and gateway information for an external print
server that is attached to the printer using a parallel cable
Note: This menu is available only if the printer is attached to an external print server
through the parallel port.
Sets the network address, netmask, and gateway information for an external print
server that is attached to the printer using a parallel cable.
Note: This menu is available only if the printer is attached to an external print server
through the parallel port.
Understanding printer menus
70