Field Lights: Forward - MacDon M105 Operator's Manual

E
G
e. Align lugs on new bulb (F) with slots (G) in body,
and push into place.
f. Secure bulb with wire retainer (E)
D
g. Replace rubber insulator boot (D).
h. Push connector onto bulb (F).
i. Position headlight into light receptacle, ensuring
top is up, and secure with screws (C).
Aligning of light should not be necessary.
169552 / 169554 / 169555
MAINTENANCE AND SERVICING
F
C
NOTE

7.10.3 Field Lights: Forward

Stop engine, and remove key from ignition
before leaving Operator's seat for any
reason. A child or even a pet could engage
an idling machine.
7.10.3.1 Adjustment
Field lights are best adjusted with the machine in
the field (or equivalent) to suit Operator
preference.
a. Hold onto hand-holds (A) on cab front corners,
and stand on header anti-slip strips.
b. Adjust lights with screws (B).
7.10.3.2 Bulb Replacement
a. Remove two screws (C), and remove light
assembly.
b. Replace bulb as described in Section 7.10.2.2
Bulb Replacement.
162
DANGER
B
A
C
Revision C