SCAN DSA 5 Instructions For Installation And Use

Freestanding + built-in

Hide thumbs Also See for Scan DSA 5:

Download this manual

I N S T R U C T I O N S

F O R

I N S T A L L A T I O N

A N D

U S E

Scan DSA 5

Freestanding + built-in

Approved according to EN 13240

This manual is accompanied by a

pamphlet with General Instructions for

Edition 13.04.2010 - GB

Installation.

Page 1 F O R I N S T A L L A T I O N A N D U S E Scan DSA 5 Freestanding + built-in Approved according to EN 13240 This manual is accompanied by a pamphlet with General Instructions for Edition 13.04.2010 - GB...
Page 2: Combustion Air
Scan DSA 5 Congratulations on your new SCAN stove/insert! You have chosen a product from one of Europe's leading manufacturers of wood-burning stoves. We are convinced that your insert will be to your full satisfaction and give you many hours of pleasure if you follow the advice and instructions of this manual.
Page 3 Scan DSA 5 fig. 2 Ceramic smoke deflector After the chimney has been swept, you have to remove the soot that has fallen down onto the ceramic smoke deflector. Lift up the deflector in one side and tilt it down in the other side so that the soot falls into the combustion chamber.
Page 4 Scan DSA 5 Warranty conditions All SCAN wood-burning stoves and inserts are made of first-class material and are subject to a strict quality control before they leave the factory. However, if an error Production number should occur, we back all SCAN wood-burning stoves and inserts with an extensive, five-year limited warranty.