Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SCAN DSA 1
Summary of Contents for SCAN DSA 1
- Page 1 SCAN DSA 1 + 2 June 2003 Krog Iversen & Co. A/S – DK-5492 Vissenbjerg...
- Page 2 An original SCAN DSA fireplace is delivered with a sign with the following information: Type, output, approvals, and registration number. . It is very important that you read the instructions for installation and use, before you take your SCAN DSA fireplace into use.
- Page 3 LIGHTING AND STOKING First Time of Use: Do not take the fireplace into use without consulting your authorized dealer, or even better in his presence, and at the earliest four weeks after the installation. It is important that the covering of the fireplace is completely dry, i.e.
- Page 4 Never put out the fire with water and never put the ash in inflammable/temperature sensitive materials and always use rubber gloves when cleaning the fireplace. The SCAN DSA fireplace is equipped with an ash groove, and it is recommended to leave a small layer of ash in order to facilitate the lighting of the fireplace.
- Page 5 Clean the glass, close the door and turn the screw counter-clockwise. Ceramic gaskets: All SCAN DSA-fireplaces (chemineés) are equipped with ceramic gaskets. The gaskets are wearing parts, and should be changed from time to time (please contact your authorized dealer).
- Page 6 4) Mounting is done in reverse order. Tighten the lower screw again. PLACING OF THE CERAMIC SMOKE DEFLECTOR A ceramic smoke deflector is delivered with all SCAN DSA-fireplaces (cheminées). The plate should be mounted according to the below sketch, so that there is an equal amount of air on both sides.
- Page 7 TROUBLE SHOOTING Smoke: - Insufficient chimney draught! - Check if the chimney has the right dimension. - Check if the smoke pipe or chimney is blocked. - Check if the chimney has the right height compared to the surroundings. - Is the combustion air and ash grate at the right position? - Is there low pressure in the house (basement, ventilation, cooker hood)? - Is the wood dry? Sootend glass:...
- Page 8 Warranty conditions for SCAN wood-burning products All SCAN wood-burning stoves and inserts are made of first-class material and are subject to a strict quality control, before they leave the factory. However, an error may occur, wherefore we back all SCAN wood-burning stoves and inserts with an extensive five years limited warranty.
Need help?
Do you have a question about the DSA 1 and is the answer not in the manual?
Questions and answers