Related Manuals for SCAN SCAN 1003-B
Summary of Contents for SCAN SCAN 1003-B
- Page 1 1003-B UK - ASSEMBLY AND INSTRUCTIONS MANUAL SCAN 1003-B ASSEMBLY AND INSTRUCTION MANUAL SCAN 1003-B...
- Page 2 1003-B CONGRATULATIONS ON YOUR NEW SCAN WOOD-BURNING STOVE You have purchased a product by one of Europe’s leading manufacturers of wood-burning stoves, and we are sure that you will have years of pleasure from your purchase. To make the best possible use of your stove, it is important that you follow our advice and instructions.
-
Page 3: Table Of Contents
CONTENTS ¬ ¬ TECHNICAL DATA Installation Dimension sketch Scan 1003-B Safety Type plate Technical data and dimensions Product registrationumber ¬ ¬ ASSEMBLY Tools needed for mounting of the stove Operating the door Loose parts Fitting the flue connection piece Disposal of packaging... -
Page 4: Technical Data
Any changes made to the product by the dealer, fitter or user could result in the product and safety functions not functioning as intended. The same applies to the fitting of accessories or extra equipment not supplied by Scan A/S. This could also be the case if parts that are necessary for the operation and safety of the stove are dismantled or removed. -
Page 5: Technical Data And Dimensions
20 kg Connecting piece internal diameter 144 mm Connecting piece external diameter 148 mm Intermittent Approval type fuelling* Scan 1003-B – Test in compliance with EN 13240 Ceramic Vermi- Combustion chamber stone culite CO Emission at 13% O 0,09... -
Page 6: Dimension Sketch Scan 1003-B
DIMENSION SKETCH SCAN 1003-B Top outlet Rear outlet Centre external air supply, rear side Centre of external air supply, bottom Height to the beginning of the connecting piece at top outlet All measures are in mm 324,5 324,5... - Page 7 DIMENSION SKETCH SCAN 1003-B Top outlet Rear outlet Centre external air supply, rear side Centre of external air supply, bottom Height to the beginning of the connecting piece at top outlet All measures are in mm 324,5 324,5...
-
Page 8: Type Plate
PRODUCT REGISTRATIONUMBER All Scan wood burning stoves are provided with a product registration number. Please make a note of this number at the rear page of this manual; you will always need to quote it when contacting your dealer or Scan A/S. -
Page 9: Assembly
3 pins Ø6 x 50 mm ¬ Eco energy label DISPOSAL OF PACKAGING Your Scan stove may come supplied with the following packaging: The wood packaging can be reused and after final use can be incinerated as a CO neutral Wood packaging product or sent for recycling. -
Page 10: Additional Accessories
Cover for the stove! fresh air 12-08-2016 MATERIALE: VÆGT: DATO: SIGN: inlet DIMENSION: AREAL: Krog Iversen & Co A/S DK-5492 Vissenbjerg© C:\Working Folder\Designs\Scan 1010\91010034.idw STI: Large plinth Small module Small plinth Scan 1003-B Mål kasser 91003026 NAVN: EMNE: TG.NR:... -
Page 11: Load-Bearing Foundation
EXISTING CHIMNEY AND PRE-FABRICATED ELEMENT CHIMNEY If you intend to connect your stove to an existing chimney, it makes sense to contact an authorised Scan dealer, or a local chim- ney sweep, for advice. These experts will also let you know if your chimney needs renovating. -
Page 12: Storage Of Flammable Material
324,5 324,5 = 10 mm You can store wood under the stove in the module with heat shield and fresh air inlet CARRYING CAPACITY Scan 1003-B Målskitse Scan 1003-B 91003024 NAVN: EMNE: TG.NR: 23-05-2019 MATERIALE: VÆGT: DATO: SIGN: M3 NR.:... -
Page 13: Safety Distance
DISTANCE TO COMBUSTIBLE FLOOR Remember to place a floor plate Møbleringsafstand: 800 mm. Brandbart materiale Flammable material Brandmur All distances are in mm Scan 1003-B Målskitse Scan 1003-B NAVN: EMNE: TG.NR: All distances are minimum distances Uisoleret røgrør Scan 1003/1004 91003017 NAVN: EMNE: TG.NR:... - Page 14 , WITH UNINSULATED FLUE PIPE DISTANCE TO FLAMMABLE MATERIALS 45° Corner installation Parallel rear wall installation DISTANCE TO FLAMMABLE MATERIALS, WITH INSULATED FLUE PIPE These distances apply for an insulated flue pipe all the way down to the stove. 45° Corner installation Parallel rear wall installation Møbleringsafstand: 800 mm.
- Page 15 DISTANCE TO FLAMMABLE MATERIALS These distances apply for an insulated flue pipe all the way down to the stove. 45° Corner installation Parallel rear wall installation 1300 1000 Brandmur og isoleret røgrør - Scan 64 uden sideglas 90064047 EMNE: TG.NR: 29-08-12 DATO: SIGN: VÆGT:...
-
Page 16: Operating The Door
OPERATING THE DOOR Push down the handle and the door will open The door should be banged shut, as on a car. Grip the handle (hold in a horizontal position) and bang the door shut FITTING THE FLUE CONNECTION PIECE The stove is prepared for a top flue outlet from the factory, but the connection piece can be turned around for a rear outlet. -
Page 17: Fresh Air Intake
To dismount the cover plates for the Ø100 mm sleeve, use an ordinary screwdriver as shown below. Tilt the screwdriver and loosen the cover plates. External air supply on the rear of the cassette External combustion air on the bottom of the cassette Ekstern forbrænding Scan 1003-B 91003039 NAVN: EMNE: TG.NR: DATO: 28-05-2019 MATERIALE: VÆGT:... - Page 18 This box must always be mounted when connecting the stove with external air supply. IMPORTANT: Only use for connection with external air supply! Combustion air box Mount the atove in the cassette Forbrændingsluftkasse Scan 1003-B 91003040 NAVN: EMNE: TG.NR: 28-05-2019 MATERIALE: VÆGT:...
- Page 19 Scan 1001 Krog Iversen & Co A/S Frisklufttilførsel bund af ovn NAVN: EMNE: TG.NR: 91001032 Scan 1010 Frisklfuft bund NAVN: EMNE: TG.NR: 91010036 DK-5492 Vissenbjerg© C:\Working Folder\Designs\Scan 1010\91010036.idw STI: 07-05-2012 MATERIALE: VÆGT: DATO: SIGN: MATERIALE: VÆGT: DATO: 18-08-16 SIGN: DIMENSION: DIMENSION:...
-
Page 20: Mounting With Plinth
M3 NR.: DIM.: AREAL: Scan A/S DK-5492 Vissenbjerg© 31-05-2016 MATERIALE: VÆGT: DATO: SIGN: C:\Working Folder\Designs\Scan 1010\91010019.idw STI: M3 NR.: DIM.: AREAL: Scan A/S DK-5492 Vissenbjerg© C:\Working Folder\Designs\Scan 1010\91010014.idw STI: It is important to adjust the plinths before mounting the modules First mount the module with fresh air inlet on the plinth and then the stove. -
Page 21: Wall-Hung Model
6 mm between the first section and the flange on the flue Min 939 mm collar. Please consult a specialist. Scan A/S disclaims all liability for the installation of Min. 465 mm wall-hung wood-burning stoves. DIMENSIONAL DRAWINGS OF THE WALL BRACKETS For wall installation we recommend using the wall brackets supplied. -
Page 22: Mounting Of The Wall Bracket
DTI NB.no. 1235 Follow assembly- and instructions manual. Use only recommended fuels. Montage- und Bedienungsanleitung beachten. Verwenden Sie nur empfohlene Brennstoffe. 1000 Scan A/S DK 5492 Vissenbjerg vægbeslag can 1010 91010020 EMNE: TG.NR: First dismount the heat shield at the rear. - Page 23 Scan 1010 NAVN: EMNE: MATERIALE: M3 NR.: DIM.: AREAL: justerskive Scan 1010 NAVN: EMNE: MATERIALE: C:\Working Folder\Designs\Scan 1010\91010045.idw STI: MATERIALE: VÆGT: M3 NR.: DIM.: M3 NR.: DIM.: AREAL: C:\Working Folder\Designs\Scan 1010\9101004 STI: C:\Working Folder\Designs\Scan 1010\91010023.idw STI: Mount the module (A) on the wall fitting. Place the stove (B). Put on the indicator plate (C)
-
Page 24: Mounting Of Combustion Chamber
Place the upper baffle plate in the top of the stove. It is important that the plate is placed correctly Upper baffle plate Note that the baffle plates are made of porous, ceramic material, and can break. Exercise care when working Montering af røgvenderplade Scan 1003-B 91003035 EMNE: TG.NR: 05-12-2018... - Page 25 Mount the lower baffle plate. The baffle plate must be supported by the rear plates. Mount the pins and put the plate in place Montering af brændkammerbeklædning Scan 1003 91003030 Montering af brændkammerbeklædning EMNE: Scan 1003-B TG.NR: NAVN: EMNE: TG.NR: 91003029 04-12-2018 ALE: VÆGT:...
-
Page 26: Adjustment Of The Door
The door may "hang" a little over time. This can be solved by adjusting the adjustment screw of the door upwards using an 8 mm open-end spanner. The adjustment screw is placed at the top of the hinge as shown below. Justering af låge Scan 1003-B 91003037 NAVN: EMNE: TG.NR:... -
Page 27: Instructions For Use
If you over-restrict the secondary airflow, soot can build up on the glass pane. The secondary airflow determines the heat output from your wood stove. Settings for normal load: 40 - 70% Adjustment of air supply, primary and secondary damper CB-technique Primary air Justering af låge Scan 1003-B NAVN: EMNE: TG.NR: 91003037 DATO: 22-10-2018 SIGN: MATERIALE: VÆGT:... -
Page 28: Instructions For Heating
LIGHTING We recommend the use of fire lighters, or similar products, which are available from your Scan dealer. Using fire lighters helps light the wood more quickly and keeps the combustion process clean. See our video about correct firing on www.scan.dk or scan the QR-code. Please note that this Scan the QR-code video is only intended as a guide. -
Page 29: Continuous Operation
CONTINUOUS OPERATION It is important to obtain as high a temperature as possible in the combustion chamber. This results in best possible use of the stove and fuel, as well as achieving clean combustion. In this way you will avoid build-up of soot on the combustion chamber lining and glass pane. -
Page 30: The Function Of The Chimney
THE FUNCTION OF THE CHIMNEY The chimney is the wood-burning stove’s motor; its performance determines how well your stove will work. The draught in the chimney creates negative pressure in the wood-burning stove. The negative pressure draws the smoke out of the stove and takes in air through the combustion air damper to fuel the combustion process. -
Page 31: Handling Of The Fuel
HANDLING OF THE FUEL SELECTING WOOD/FUEL You can use any type of wood as fuel. However harder woods, such as beech or ash, are generally better for heating, as they burn more evenly and create less ash. Other woods, such as maple, birch and spruce, are excellent alternatives. PREPARATION The best fuel is obtained where the tree has been felled and the wood sawn and split before May 1st. -
Page 32: Maintainance
Clean your wood-burning stove by wiping it down with a dry, lint-free cloth. If the paint finish gets damaged, you can purchase repair paint in spray form from your Scan dealer. As slight differences in colour shade are possible, we recommend you spray a larger area to achieve a natural blend. For best results, apply repair spray when the stove is warm enough for you to just keep your hand on it, but no hotter. -
Page 33: Cleaning The Glass
Lower baffle plate Baffle plate in steel Fitting for baffle plate 3 pins for Baffle plate in lower baffle plate ceramic stone/vermiculite Snit igennem ovn Scan 1003-B NAVN: EMNE: TG.NR: 91003038 28-05-2019 MATERIALE: VÆGT: DATO: SIGN: DIMENSION: AREAL: Krog Iversen &... - Page 34 TROUBLESHOOTING SMOKE ESCAPING ¬ Damp wood ¬ Chimney not drawing properly ¬ Chimney is not properly dimensioned for the stove ¬ Check if the smoke gas pipe/chimney are blocked ¬ Is the chimney the right height for its surroundings? ¬ Vacuum in the room ¬...
- Page 35 You must quote your stove‘s product registration number when you contact us or your authorised Scan dealer with a warranty claim. The warranty covers all parts which in the opinion of Scan A/S require repair or replacement due to manufacturing or construc- tion error The warranty applies to the original purchaser of the product only, and is not transferable (except on prior sale).
- Page 36 NOTES...
- Page 40 Product registration number Quote this number at all enquiries Edition: UK 91003576 10058369-P00 SCAN A/S Glasvænget 3-9 DK-5492 Vissenbjerg www.scan.dk 08.01.2020...