If your All-In-One is attached to a computer, make sure:
•
Both your computer and your All-In-One are on.
•
The All-In-One is connected directly to your computer.
•
The All-In-One is set as your default printer.
•
The USB cable is securely attached to your computer and to your
All-In-One. To purchase a USB cable, part number 12A2405, visit
the Lexmark Web site at www.lexmark.com.
Anytime your All-In-One has a problem, make sure:
•
You unlock the scanner:
1
Press Power to turn the All-In-One off.
2
Unlock the scanner.
3
Press Power to turn the All-In-One back on.
Note: If you have not unlocked the scanner, you will hear a
•
You install both of the print cartridges. The Lexmark X6100 Series
only works if you have both cartridges installed. For help installing
the cartridges, see page 76.
•
You remove the stickers, transparent tape, and foam from the
bottom of the print cartridges. For an illustration, see page 77.
Problem:
loud banging noise when you turn the All-In-One on.
Go to:
page 89
page 89
page 90
page 93
page 93
page 95
page 95
page 96
page 96
88