Lexmark X6100 User Manual page 33

Follow these guidelines when loading paper in the paper support.
Load up to:
100 sheets of
plain paper
10 envelopes
10 greeting cards,
index cards,
postcards, or
photo cards
25 sheets of
coated, photo, or
glossy paper
10 transparencies
Make sure:
• The paper is loaded vertically against the right side of the
paper support.
• The paper guide is against the left edge of the paper.
Note: To load letterhead, make sure the front of the
letterhead faces you, and feed the top of the letterhead into
the All-In-One first.
• The print side of the envelopes faces you.
• The envelopes are loaded vertically
against the right side of the paper
support.
• The stamp location is in the upper left
corner.
• The paper guide rests against the left
edge of the envelopes.
• You choose to print the envelope with
Landscape orientation.
• You select the correct envelope size.
Select the next biggest size if the exact envelope size is
not listed, and set the left and right margins so that your
envelope text will be correctly positioned on the
envelope.
Note: You can load a single envelope into the paper
support without removing plain paper.
• The print side of the cards faces you.
• The cards are loaded vertically against the right side of
the paper support.
• The paper guide rests against the left edge of the cards.
• The glossy or coated side of the paper faces you.
• The paper guide rests against the left edge of the photo
paper.
• The rough side of the transparencies faces you.
• The paper guide rests against the left edge of the
transparencies.
Note: You can load a single transparency into the paper
support without removing plain paper.
27