Table of Contents
Advertisement
Control Panel
The SEC8 control panel is an advanced intruder alarm system
with 8 on-board zones and on-board multi format communicator.
The system is ideally suited to domestic and small commercial
installations.
The control panel provides a multi-channel integrated speech
dialler. Voice messages are recorded via a touch tone telephone
or by using the UDL software package.
Remote arming and disarming and system control can also be
carried out by calling the protected premises with a touch-tone
telephone. On answering the incoming call you are greeted with a
voice prompted menu.
The system can be further enhanced by using the ACM-NX module
which provides both IP and X-10 connectivity. X-10 is a simple
home automation protocol that uses the existing mains wiring to
communicate with X-10 compatible devices via a XM10U
controller. Once the ACM-NX is installed, both the system and X-
10 devices can be controlled remotely using smart phone apps.
A choice of either LCD or LED remote keypads is available. Other
features include:
8 programmable on-board zones
8 user codes plus engineer code
4 programmable outputs (1Amp rated)
On-board communicator/modem/speech dialler
Local or remote upload/download
250 event log
Advanced system diagnostics
1.2 Amp power supply
Communication port for accessories etc
Loudspeaker output (uses output 4)
Flash upgradable
Remote Keypads
The SEC8 will accept up to a maximum of 4 remote keypads. All
remote keypads require a 4-wire connection to the control panel
using standard alarm cable. The following remote keypad models
are available:
LED Remote Keypad
The LED keypad features a dual 7 segment display for displaying
zone status and system fault messages. A set of dedicated
system status LEDs for AC, Ready, Armed, Trouble, Bypass, Alert
and Alarm are also provided. Other features include:
4-wire connection using standard alarm cable
Internal sounder
Backlit keyboard
LCD Remote Keypad
The LCD keypad features a 2 x 20 character blue display for
showing all zone status and system fault messages. A set of
dedicated system status LEDs for AC, Trouble and Alert are also
provided. Other features include:
4-wire connection using standard alarm cable
Internal sounder
Backlit keyboard
P0031-LI-01.00
ACM-NX
The ACM-NX is an IP based communicator and X-10 home
automation interface PCB module. Features include:
Ethernet connection to LAN/WAN
Remote access via AlcoUDL or smart phone app
Alarm reporting via LAN/WAN to PC based alarm receiver
X-10 port for automating X-10 devices via XM10U/E
controller
X-10 devices controlled via the system or smart phone app
PCB module clips into the control panel housing
USB-Link
The USB-Link provides USB connectivity between the SEC8 and
the host computer. It is required when a direct connection is
required between the UDL software package and the SEC8
control panel.
Upload/Download Software
This Windows based software can be used to remotely or locally
program and diagnose the Securacom range of security systems.
Features include:
Simple intuitive user interface
Local or remote via modem and IP
System remote control
Advanced system diagnostics
Multi language support
System audit trail
5
Advertisement
Table of Contents
