Securacom SEC8 Installation Manual page 39

LCD
P0031-LI-01.00
LED Description
ESC ?? Exit mode started by zone ??.
Exit mode stopped.
ES
Exit mode failed by zone ??.
EF ??
EN ?? Entry mode stared by zone ??.
ET Entry timeout alarm.
System armed.
SA
SD System disarmed.
S ? Stay armed #? (? = 1, 2 or 3).
Arming failed.
AF ?
AU The system was armed with an Alarm Transmission System (ATS) fault.
AA The system was automatically armed.
AD The system was automatically disarmed.
The system was automatically armed remotely.
RA
RD The system was automatically disarmed remotely.
SU The system was powered up.
The mains ac supply has been switched off.
ACOff
ACOn The mains ac supply has been restored.
BF Battery fault #? (1: Presence Fail; 2: Load Test Fail).
BR Battery fault restored.
The system standby battery voltage is low (The system is running on battery only).
LB
TD The system time and date has been changed.
ENON The engineer access code has been entered.
The engineer has logged off.
ENOF
BFAL The bell fuse has gone open circuit (electronic fuse).
BFAR The bell fuse has restored.
AFAL The auxiliary 12V fuse has gone open circuit (electronic fuse).
The auxiliary 12V fuse has restored.
AFAR
BFAL ? The battery fuse has gone open circuit (electronic fuse).
BFAR The battery fuse has restored.
The control panel box tamper has been activated.
BTAL
BTAR The control panel box tamper has restored.
RTAL ? Keypad ? box tamper has been activated.
RTAR ? Keypad ? box tamper has restored.
Device ?? on network lost.
RL ?
RF ? Device ?? on network found.
TS User walk test mode started.
User walk test mode ended.
TE
BTS User bell test started.
BTE User bell test ended.
ATC An automatic test call was sent to the Alarm Receiving Centre (ARC).
A manual (user) test call was sent to the Alarm Receiving Centre (ARC).
TC
CT ? ON Control Timer ? is on.
CT ? OFF Control Timer ? is off.
Zone soak test has started and will run for ?? days.
TS ??
TF ?? Zone ?? has failed whilst on test.
FN ?? First activation from zone ??. The zone has the "Double Knock" attribute.
AA The user has disarmed the system within the abort delay period.
The bell tamper alarm has been activated.
BTAL
BTAR The bell tamper has restored.
ATSF The Alarm Transmission System (ATS) has detected a fault with the telephone line.
The ATS Fault has restored.
ATSR
39