Reducing Or Enlarging Copies; Making A Copy Lighter Or Darker - Lexmark 231 User Manual

Copying
5
Press the arrow buttons to select a duplex option, and then press
The first number represents sides of the original documents; the second number represents sides of the copy. For
example, select 1 To 2 Sided if you have 1-sided original documents and you want 2‑sided copies.
6
Press .
7
If you placed the document on the scanner glass and have additional pages to copy, then place the next page on
the scanner glass, and then press 1 on the keypad. Otherwise, press 2 on the keypad.
8
Press to return to Ready.

Reducing or enlarging copies

Copies can be reduced to 25% of the original document size or enlarged to 400% of the original document size. The
factory default setting for Scale is Auto. If you leave Scale set to Auto, then the content of your original document will
be scaled to fit the size of the paper onto which you are copying.
To reduce or enlarge a copy:
1
Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
2
If you are loading a document into the ADF, then adjust the paper guides.
3
From the printer control panel, press the Copy button.
4
Press the Scale button.
5
Press the arrow buttons until the scale option you want appears, and then press
If you selected Custom, then do the following:
a
Press the arrow buttons to decrease or increase the size, or enter a number between 25 and 400 on the keypad.
b
Press .
6
Press .
7
If you placed the document on the scanner glass and have additional pages to copy, then place the next page on
the scanner glass, and then press 1 on the keypad. Otherwise, press 2 on the keypad.
8
Press to return to Ready.

Making a copy lighter or darker

1
Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
2
If you are loading a document into the ADF, then adjust the paper guides.
3
From the printer control panel, press the Copy button.
4
Press the Darkness button.
5
Press the arrow buttons to make the copy lighter or darker.
.
.
72