Print Settings; Setup Menu - Lexmark 231 User Manual

Understanding printer menus
Menu item
Base File Name
Background Removal
‑4 to +4
Contrast
0–5
Best for content
Shadow Detail
‑4 to +4
Scan edge to edge
On
Off
Sharpness
1–5

Print Settings

Menu item
Copies
1‑999
Sides (Duplex)
1 sided
2 sided
Print Settings

Setup menu

Menu item
Printer Language
PS Emulation
PCL Emulation
Description
Limit the base file name to under 53 characters, because the time is added to the end
of the base file name
Note: Scanned‑image is the factory default setting.
Adjusts the amount of background visible on a copy
Note: 0 is the factory default setting.
Specifies the contrast of the output
Note: "Best for content" is the factory default setting.
Adjusts the amount of shadow detail visible on a scanned image
Note: 0 is the factory default setting.
Specifies if the original document is scanned edge to edge
Note: Off is the factory default setting.
Adjusts the sharpness of a scanned image
Note: 3 is the factory default setting.
Description
Specifies the number of copies to print
Note: 1 is the factory default setting.
Enables duplex (two-sided) printing
Note: 1 sided is the factory default setting.
Description
Sets the default printer language
Notes:
•
PostScript emulation uses a PS interpreter for processing
print jobs. PCL emulation uses a PCL interpreter for
processing print jobs.
•
The factory default printer language is PCL Emulation.
•
Setting a printer language as the default does not prevent a
software program from sending print jobs that use another
printer language.
135