Copying Photos; Copying On Specialty Media - Lexmark 231 User Manual

Copying
5
From the printer control panel, press
6
Press to return to Ready.
Copying using the scanner glass
1
Place an original document facedown on the scanner glass in the upper left corner.
2
From the printer control panel, press the Copy button, or use the keypad to enter the number of copies.
3
Change the copy settings as needed.
4
From the printer control panel, press
5
Place the next document on the scanner glass, and then press 1 on the keypad. Otherwise, press 2 on the keypad.
6
Press to return to Ready.

Copying photos

1
Place a photo facedown on the scanner glass in the upper left corner.
2
From the printer control panel, press the Copy button.
3
Press the Content button until the light next to Photo comes on.
4
Change the copy settings as needed.
5
From the printer control panel, press
Another page? 1=Yes 2=No appears.
6
If you want to copy another photo, place it on the scanner glass, and then press 1 on the keypad. Otherwise, press
2 on the keypad.
7
Press to return to Ready.

Copying on specialty media

Copying to transparencies
1
Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
2
If you are loading a document into the ADF, then adjust the paper guides.
3
From the printer control panel, press the Copy button.
4
From the Copy area, press the Options button.
5
Press the arrow buttons until Paper Source appears, and then press
6
Press the arrow buttons until the paper source containing the transparencies appears, and then press
7
Press .
.
.
.
.
69
.