Understanding printer menus
Network Card menu
Menu item
View Card Status
Connected
Disconnected
View Card Speed
View Network Address
UAA
LAA
Job Timeout
0‑225 seconds
Banner Page
On
Off
TCP/IP menu
Use the following menu items to view or set the TCP/IP information.
Note: This menu is available only for network models or printers attached to print servers.
Menu item
TCP/IP
Activate
On
Off
TCP/IP
View Hostname
TCP/IP
IP Address
Netmask
Gateway
Description
Allows you to ascertain whether the Network Card is connected.
Reflects the speed of a currently active network card.
Both addresses are represented by 12‑digit hexadecimal numbers.
Sets the amount of time in seconds that a network print job can take before it
is canceled.
Notes:
•
90 seconds is the factory default setting.
•
A setting value of 0 disables the timeout.
•
If a value of 1–9 is selected, the setting is saved as 10.
Allows the printer to print a banner page.
Note: Off is the factory default setting.
Description
Specifies whether to activate TCP/IP
Note: On is the factory default setting.
Shows the current TCP/IP hostname
Lets you view or change the current TCP/IP Address, Netmask, and Gateway
information
Note: Each requires four fields.
118