Not Enough Free Space In Flash Memory For Resources; Unformatted Flash Detected; Standard Network Software Error; Standard Usb Port Disabled - Lexmark 231 User Manual

Troubleshooting

52 Not enough free space in flash memory for resources

Try one or more of the following:
•
Press the arrow buttons until Continue appears, and then press
printing.
Downloaded fonts and macros not previously stored in flash memory are deleted.
• Delete fonts, macros, and other data stored in flash memory.
•
Upgrade to a larger capacity flash memory card.

53 Unformatted flash detected

Try one or more of the following:
• Press the arrow buttons until Continue appears, and then press
•
Format the flash memory. If the error message remains, the flash memory may be defective and require replacing.
54 Network <x> software error
The printer detects that a network port is installed, but cannot communicate with it. The printer disables all
communication to the associated network interface.
Try one or more of the following:
•
Press to clear the message and continue printing.
•
Turn the power off and then back on to reset the printer.
•
Upgrade (flash) the network firmware in the printer or print server.

54 Standard network software error

Try one or more of the following:
•
Press the arrow buttons until Continue appears, and then press
•
Turn the printer off and then back on to reset the printer.
•
Upgrade (flash) the network firmware in the printer or print server.

56 Standard USB port disabled

Try one or more of the following:
•
The printer discards any data received through the USB port. Press
•
Make sure the USB Buffer menu item is not set to Disabled.

58 Too many flash options installed

Try one or more of the following:
•
Turn the printer off, and then remove extra flash options:
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
to stop the defragment operation and continue
to continue printing.
to continue printing.
to clear the message and continue printing.
182