Pcl Emul Menu - Lexmark 231 User Manual

Understanding printer menus
Menu item
Font Priority
Resident
Flash/Disk

PCL Emul menu

Menu item
Font Source
Resident
Download
Flash
All
Font Name
<x>
Symbol Set
<x>
PCL Emulation Settings
Point Size
1.00–1008.00
PCL Emulation Settings
Pitch
0.08–100
Description
Establishes the font search order
Notes:
•
Resident is the factory default setting.
•
A formatted flash memory option card must be installed in the printer
and operating properly for this menu item to be available.
•
The flash memory option cannot be Read/Write, Write, or
password‑protected.
•
Job Buffer Size must not be set to 100%.
Description
Specifies the set of fonts available
Notes:
•
Resident is the factory default setting. It shows the factory default set of
fonts downloaded into RAM.
•
Download appears only if downloaded fonts exist. It shows all the fonts
downloaded into RAM.
• Flash appears only if a flash option containing fonts is installed.
• A flash option must be properly formatted and cannot be Read/Write,
Write, or password protected.
• All shows all fonts available to any option.
Lets you view or change the setting from a selection list
Lets you view or change the setting from a selection list
Changes the point size for scalable typographic fonts
Notes:
•
12 is the factory default setting.
•
Point Size refers to the height of the characters in the font. One point
equals approximately 1/72 of an inch.
•
Point sizes can be increased or decreased in 0.25‑point increments.
Specifies the font pitch for scalable monospaced fonts
Notes:
•
10 is the factory default setting.
•
Pitch refers to the number of fixed‑space characters per inch (cpi).
•
Pitch can be increased or decreased in 0.01‑cpi increments.
•
For nonscalable monospaced fonts, the pitch appears on the display but
cannot be changed.
141